The tablelist::tablelist Command

by

Csaba Nemethi

csaba.nemethi@t-online.de

Contents

Start page

Quick Reference

NAME
tablelist::tablelist - Create and manipulate tablelist widgets

SYNOPSIS
tablelist::tablelist pathName ?options?
STANDARD OPTIONS
-borderwidth          -highlightthickness  -setgrid
-cursor               -relief              -xscrollcommand
-exportselection      -selectbackground    -yscrollcommand
-highlightbackground  -selectborderwidth
-highlightcolor       -selectforeground
OPTIONS FOR THE BODY COMPONENT OF THE WIDGET
-background  -disabledforeground  -font  -foreground
WIDGET-SPECIFIC OPTIONS
-activestyle frame|none|underline
-arrowcolor color
-arrowstyle flat7x4|flat7x5|flat7x7|flat8x5|flat9x5|sunken8x7|sunken10x9|sunken12x11
-arrowdisabledcolor color
-columns {width title ?left|right|center? width title ?left|right|center? ...}
-columntitles {title title ...}
-editendcommand command
-editstartcommand command
-forceeditendcommand boolean
-height lines
-incrarrowtype up|down
-labelactivebackground color
-labelactiveforeground color
-labelbackground color  or  -labelbg color
-labelborderwidth screenDistance  or  -labelbd screenDistance
-labelcommand command
-labelcommand2 command
-labeldisabledforeground color
-labelfont font
-labelforeground color  or  -labelfg color
-labelheight lines
-labelpady screenDistance
-labelrelief raised|sunken|flat|ridge|solid|groove
-listvariable variable
-movablecolumns boolean
-movablerows boolean
-movecolumncursor cursor
-movecursor cursor
-protecttitlecolumns boolean
-resizablecolumns boolean
-resizecursor cursor
-selectmode mode (single|browse|multiple|extended)
-selecttype row|cell
-setfocus boolean
-showarrow boolean
-showlabels boolean
-showseparators boolean
-snipstring string
-sortcommand command
-spacing screenDistance
-state normal|disabled
-stretch all|columnIndexList
-stripebackground color  or  -stripebg color
-stripeforeground color  or  -stripefg color
-stripeheight lines
-takefocus 0|1|""|command
-targetcolor color
-titlecolumns number
-tooltipaddcommand command
-tooltipdelcommand command
-width characters

DESCRIPTION

COLORS AND FONTS

COLUMN CONFIGURATION OPTIONS
-align left|right|center
-background color  or  -bg color
-changesnipside boolean
-editable boolean
-editwindow name
-font font
-foreground color  or  -fg color
-formatcommand command
-hide boolean
-labelalign left|right|center
-labelbackground color  or  -labelbg color
-labelborderwidth screenDistance  or  -labelbd screenDistance
-labelcommand command
-labelcommand2 command
-labelfont font
-labelforeground color  or  -labelfg color
-labelheight lines
-labelimage image
-labelpady screenDistance
-labelrelief raised|sunken|flat|ridge|solid|groove
-maxwidth width
-name name
-resizable boolean
-selectbackground color
-selectforeground color
-showarrow boolean
-showlinenumbers boolean
-sortcommand command
-sortmode ascii|command|dictionary|integer|real
-stretchable boolean
-text list
-title title
-width width
-wrap boolean

ROW CONFIGURATION OPTIONS
-background color  or  -bg color
-font font
-foreground color  or  -fg color
-hide boolean
-name name
-selectable boolean
-selectbackground color
-selectforeground color
-text list

CELL CONFIGURATION OPTIONS
-background color  or  -bg color
-editable boolean
-editwindow name
-font font
-foreground color  or  -fg color
-image image
-selectbackground color
-selectforeground color
-stretchwindow boolean
-text text
-window command
-windowdestroy command

INTERACTIVE CELL EDITING

ROW INDICES
number  knumber  active  anchor  end  @x,y  name
COLUMN INDICES
number  active  anchor  end  @x,y  name
CELL INDICES
row,col  active  anchor  end  @x,y

    row: number  knumber  active  anchor  end  name
    col: number  active  anchor  end  name
WIDGET COMMAND
pathName activate index
pathName activatecell cellIndex
pathName attrib ?name? ?value name value ...?
pathName bbox index
pathName bodypath
pathName bodytag
pathName cancelediting
pathName cellattrib cellIndex ?name? ?value name value ...?
pathName cellcget cellIndex option
pathName cellconfigure cellIndex ?option? ?value option value ...?
pathName cellindex cellIndex
pathName cellselection option args
pathName cellselection anchor cellIndex
pathName cellselection clear firstCell lastCell
pathName cellselection clear cellIndexList
pathName cellselection includes cellIndex
pathName cellselection set firstCell lastCell
pathName cellselection set cellIndexList
pathName cget option
pathName columnattrib columnIndex ?name? ?value name value ...?
pathName columncget columnIndex option
pathName columnconfigure columnIndex ?option? ?value option value ...?
pathName columncount
pathName columnindex columnIndex
pathName columnwidth columnIndex ?-requested|-stretched|-total?
pathName configcelllist {cellIndex option value cellIndex option value ...}
pathName configcells ?cellIndex option value cellIndex option value ...?
pathName configcolumnlist {columnIndex option value columnIndex option value ...}
pathName configcolumns ?columnIndex option value columnIndex option value ...?
pathName configrowlist {index option value index option value ...}
pathName configrows ?index option value index option value ...?
pathName configure ?option? ?value option value ...?
pathName containing y
pathName containingcell x y
pathName containingcolumn x
pathName curcellselection
pathName curselection
pathName delete first last
pathName delete indexList
pathName deletecolumns firstColumn lastColumn
pathName deletecolumns columnIndexList
pathName editcell cellIndex
pathName editwintag
pathName editwinpath
pathName entrypath
pathName fillcolumn columnIndex text
pathName finishediting
pathName formatinfo
pathName get first last
pathName get indexList
pathName getcells firstCell lastCell
pathName getcells cellIndexList
pathName getcolumns firstColumn lastColumn
pathName getcolumns columnIndexList
pathName getkeys first last
pathName getkeys indexList
pathName hasattrib name
pathName hascellattrib cellIndex name
pathName hascolumnattrib columnIndex name
pathName hasrowattrib index name
pathName imagelabelpath cellIndex
pathName index index
pathName insert index ?item item ...?
pathName insertcolumnlist columnIndex {width title ?left|right|center? width title ?left|right|center? ...}
pathName insertcolumns columnIndex ?width title ?left|right|center? width title ?left|right|center? ...?
pathName insertlist index itemList
pathName iselemsnipped cellIndex fullTextName
pathName istitlesnipped columnIndex fullTextName
pathName itemlistvar
pathName labelpath columnIndex
pathName labels
pathName move source target
pathName movecolumn sourceColumn targetColumn
pathName nearest y
pathName nearestcell x y
pathName nearestcolumn x
pathName rejectinput
pathName resetsortinfo
pathName rowattrib index ?name? ?value name value ...?
pathName rowcget index option
pathName rowconfigure index ?option? ?value option value ...?
pathName scan mark|dragto x y
pathName see index
pathName seecell cellIndex
pathName seecolumn columnIndex
pathName selection option args
pathName selection anchor index
pathName selection clear first last
pathName selection clear indexList
pathName selection includes index
pathName selection set first last
pathName selection set indexList
pathName separatorpath ?columnIndex?
pathName separators
pathName size
pathName sort ?-increasing|-decreasing?
pathName sortbycolumn columnIndex ?-increasing|-decreasing?
pathName sortbycolumnlist columnIndexList ?sortOrderList?
pathName sortcolumn
pathName sortcolumnlist
pathName sortorder
pathName sortorderlist
pathName togglecolumnhide firstColumn lastColumn
pathName togglecolumnhide columnIndexList
pathName togglerowhide first last
pathName togglerowhide indexList
pathName unsetattrib name
pathName unsetcellattrib cellIndex name
pathName unsetcolumnattrib columnIndex name
pathName unsetrowattrib index name
pathName windowpath cellIndex
pathName xview args
pathName xview
pathName xview units
pathName xview moveto fraction
pathName xview scroll number units|pages
pathName yview args
pathName yview
pathName yview units
pathName yview moveto fraction
pathName yview scroll number units|pages

DEFAULT AND INDIVIDUAL BINDINGS FOR THE TABLELIST BODY

DEFAULT BINDINGS FOR THE HEADER LABELS

DEFAULT BINDINGS FOR INTERACTIVE CELL EDITING

KEYWORDS
tablelist, multi-column, listbox, widget

Contents     Start page

Detailed Reference

NAME
tablelist::tablelist - Create and manipulate tablelist widgets

SYNOPSIS
tablelist::tablelist pathName ?options?
STANDARD OPTIONS
-borderwidth          -highlightthickness  -setgrid
-cursor               -relief              -xscrollcommand
-exportselection      -selectbackground    -yscrollcommand
-highlightbackground  -selectborderwidth
-highlightcolor       -selectforeground
See the options manual entry for details on the standard options.  The -highlightbackground, -highlightcolor, and -highlightthickness options are only supported by the Tablelist package, but not by Tablelist_tile.  When using the package Tablelist_tile, the options -selectbackground, -selectborderwidth, and -selectforeground have theme-specific default values.

OPTIONS FOR THE BODY COMPONENT OF THE WIDGET
-background  -disabledforeground  -font  -foreground
These options (described in the options manual entry) are only valid for the body component of the tablelist widget.  As discussed in the next section, the colors and font used when drawing the header labels can be different from those specified for the body.  When using the package Tablelist_tile, these options have theme-specific default values.

WIDGET-SPECIFIC OPTIONS

Command-Line Name:  -activestyle
Database Name:  activeStyle
Database Class:  ActiveStyle

Specifies how to diplay the active item or element (depending on the value of the -selecttype configuration option) when the tablelist has the keyboard focus.  The allowed values are frame, none, and underline.  The default value frame shows a thin frame around the active item or element, which in most cases looks nice.  It looks less pretty when applied to the active item if the background color of some of its cells was changed by using the columnconfigure or cellconfigure widget command and no column separators are shown.  The value none specifies that no special indication of the active item or element is to be performed.  The value underline produces the same visual effect as in the case of the Tk core listbox.

Command-Line Name:  -arrowcolor
Database Name:  arrowColor
Database Class:  ArrowColor

Specifies the color to use for the up- or down-arrow placed into a column label by the sortbycolumn or sortbycolumnlist subcommand of the Tcl command associated with the widget.  This option is only relevant if the value of the -showarrow option is true.  The default value depends on the windowing system in the Tablelist package and on the current theme in Tablelist_tile.  For example, if the windowing system is x11 then the default is an empty string, indicating that the arrow will inherit the background color of the label in which it is placed (but is distinguishable from the latter, due to its 3-D border and sunken relief, because in this case the -arrowstyle option has the default value sunken10x9).  On the windowing system win32, the default arrow color is #aca899 for Windows XP and Vista, and an empty string for older Windows versions, paired with the default arrow style flat9x5 and sunken8x7, respectively.  Finally, for the windowing systems classic and aqua on the Macintosh, the default arrow color is #777777 and the default arrow style is flat7x7.

Command-Line Name:  -arrowstyle
Database Name:  arrowStyle
Database Class:  ArrowStyle

Specifies the relief, width, and height of the up- or down-arrow placed into a column label by the sortbycolumn or sortbycolumnlist subcommand of the Tcl command associated with the widget.  This option is only relevant if the value of the -showarrow option is true.  The currently supported values are flat7x4, flat7x5, flat7x7, flat8x5, flat9x5, sunken8x7, sunken10x9, and sunken12x11.  The default value depends on the windowing system in the Tablelist package and on the current theme in Tablelist_tile; see the description of the -arrowcolor option for details.

Command-Line Name:  -arrowdisabledcolor
Database Name:  arrowDisabledColor
Database Class:  ArrowDisabledColor

Specifies the color to use for the up- or down-arrow placed into a column label by the sortbycolumn or sortbycolumnlist subcommand of the Tcl command associated with the widget when the tablelist's state is disabled.  This option is only relevant if the value of the -showarrow option is true.  When the default value of the -arrowcolor option is an empty string then this is the default for the -arrowdisabledcolor option, too; otherwise the latter's default value equals the default foreground color of the header labels in disabled state.

Command-Line Name:  -columns
Database Name:  columns
Database Class:  Columns

Specifies the widths, titles, and alignments of the columns.  The option's value must be a list of the form

width title ?alignment? width title ?alignment? ...

Each width must be a number.  A positive value specifies the column's width in average-size characters of the widget's font.  If width is negative, its absolute value is interpreted as a column width in pixels.  Finally, a value of zero specifies that the column's width is to be made just large enough to hold all the elements in the column, including its header (but no larger than the maximum width indicated by the -maxwidth column configuration option).  In all three cases, the effective column width will be somewhat greater because of the margins created automatically to the left and right of the column.

Each title specifies the text to be displayed in the column's header, and may optionally be followed in the next list element by an alignment, which specifies how to align the elements of the column.  Each alignment must be one of left, right, or center.  The default is left.  The alignment also refers to the column's title as long as the -labelalign option hasn't been specified for that column, or if its value is an empty string.

The default value of this option is an empty list, specifying that initially the widget has no columns.

REMARK:  Whenever possible, you should specify the value zero for the column widths, i.e., use dynamic-width columns.  Besides being more user-friendly, dynamic-width columns have the main advantage that they increase the performance of the item insertion and sorting quite significantly.

Command-Line Name:  -columntitles
Database Name:  columnTitles
Database Class:  ColumnTitles

This option provides a simplified form of specifying dynamic-width, left-aligned tablelist columns.  Its value is viewed as a list of column titles.  The default is an empty list.

In the simplest case that no columns have been specified yet, setting this option to the value given by the list

title title ...

is equivalent to setting the -columns option to the value given by the list

0 title left 0 title left ...

If the columns have already been specified then this option updates their titles (as many of them as possible) and, if the number of elements of its value is greater than the number of columns then it uses the remaining elements as titles of additional dynamic-width, left-aligned columns.  For example, if the widget has 3 columns and the option's value is a list of length 5 then the option will update the titles of the 3 columns and will append 2 new dynamic-width, left-aligned columns having as titles the last 2 elements of the list.  If the widget has 3 columns and the option specifies just 2 texts then it will update the titles of the first 2 columns only.

Command-Line Name:  -editendcommand
Database Name:  editEndCommand
Database Class:  EditEndCommand

Specifies a Tcl command to be invoked on normal termination of the interactive editing of a cell's contents if the final text of the temporary embedded widget used for the editing is different from its initial one.  The command is automatically concatenated with the name of the tablelist widget, the cell's row and column indices, as well as the final contents of the edit window, the resulting script is evaluated in the global scope, and the return value becomes the cell's new contents after destroying the temporary embedded widget.  The main purpose of this script is to perform a final validation of the edit window's contents.  See the description of the -forceeditendcommand option for more about the invocation of the command mentioned above, as well as the INTERACTIVE CELL EDITING section for details on the editing process.

Command-Line Name:  -editstartcommand
Database Name:  editStartCommand
Database Class:  EditStartCommand

Specifies a Tcl command to be invoked when the interactive editing of a cell's contents is started.  The command is automatically concatenated with the name of the tablelist widget, the cell's row and column indices, as well as the text displayed in the cell, the resulting script is evaluated in the global scope, and the return value becomes the initial contents of the temporary embedded widget used for the editing.  The main purpose of this script is to define validations for the edit window's contents.  See the INTERACTIVE CELL EDITING section for details on the editing process.

Command-Line Name:  -forceeditendcommand
Database Name:  forceEditEndCommand
Database Class:  ForceEditEndCommand

Specifies a boolean value that controls the invocation of the command given by the the -editendcommand option.  If this value is true then the command will be invoked on normal termination of the editing process even if the final text of the temporary embedded widget used for the editing equals its initial one, and will also be invoked when the interactive cell editing is canceled (in the latter case, the text passed to it as last argument will be the cell's original contents, not its final one).  The default value of this option is 0, meaning that the command will only be invoked on normal termination of the editing process, if the final text of the temporary embedded widget is different from its initial one.  See the INTERACTIVE CELL EDITING section for details on the editing process.

Setting this option to true enables you to execute an arbitrary action whenever the interactive cell editing is finished.  Just binding a script to the <Destroy> event for the temporary embedded widget used for the editing won't work, because that widget might be destroyed and recreated automatically under various circumstances.  Alternately, you can use the <<TablelistCellUpdated>> and <<TablelistCellRestored>> virtual events, generated by the finishediting and cancelediting subcommands, respectively.

Command-Line Name:  -height
Database Name:  height
Database Class:  Height

Specifies the desired height for the window, in lines.  If zero or less then the desired height for the window is made just large enough to hold the header and all the items in the tablelist widget, provided that no column-, row-, or cell-specific fonts are used and no embedded images or windows are displayed in the widget's cells.

Command-Line Name:  -incrarrowtype
Database Name:  incrArrowType
Database Class:  IncrArrowType

Specifies the type of the arrow placed into a column label when sorting the items based on that column in increasing order, with the aid of the sortbycolumn or sortbycolumnlist subcommand of the Tcl command associated with the widget.  The value of this option must be one of up or down.  The default is up.  This option is only relevant if the value of the -showarrow option is true.

Command-Line Name:  -labelactivebackground
Database Name:  labelActiveBackground
Database Class:  Foreground

Specifies the -activebackground option for the header labels, i.e., the background color to use when the mouse cursor is positioned over a header label and the value of tk_strictMotif is false.  This option is only defined in the Tablelist package if the Tk version being used supports the -activebackground option for label widgets.  This is checked by Tablelist at initialization time, and will normally be the case for Tk versions 8.3.2 or higher.  On the other hand, the Tablelist_tile package doesn't support the -labelactivebackground option.

Command-Line Name:  -labelactiveforeground
Database Name:  labelActiveForeground
Database Class:  Background

Specifies the -activeforeground option for the header labels, i.e., the foreground color to use when the mouse cursor is positioned over a header label and the value of tk_strictMotif is false.  This option is only defined in the Tablelist package if the Tk version being used supports the -activeforeground option for label widgets.  This is checked by Tablelist at initialization time, and will normally be the case for Tk versions 8.3.2 or higher.  On the other hand, the Tablelist_tile package doesn't support the -labelactiveforeground option.

Command-Line Name:  -labelbackground or -labelbg
Database Name:  labelBackground
Database Class:  Background

Specifies the -background option for the header labels.  In the package Tablelist_tile this option has a theme-specific default value.

Command-Line Name:  -labelborderwidth or -labelbd
Database Name:  labelBorderWidth
Database Class:  BorderWidth

Specifies the -borderwidth option for the header labels.  This option is different from the standard -borderwidth option defined for the tablelist widget itself.  In the package Tablelist_tile this option has a theme-specific default value.

Command-Line Name:  -labelcommand
Database Name:  labelCommand
Database Class:  LabelCommand

Specifies the Tcl command to be invoked when mouse button 1 is pressed over one of the header labels and later released over the same label.  When the <ButtonRelease-1> event occurs, the command is automatically concatenated with the name of the tablelist widget and the column index of the respective label, and the resulting script is evaluated in the global scope.  If the tablelist's state is disabled then this action will not take place.  The most common value of this option is tablelist::sortByColumn; this command sorts the items based on the column whose index was passed to it as second argument.

Command-Line Name:  -labelcommand2
Database Name:  labelCommand2
Database Class:  LabelCommand2

Specifies the Tcl command to be invoked when mouse button 1 is pressed together with the Shift key over one of the header labels and later released over the same label.  When the <ButtonRelease-1> event occurs, the command is automatically concatenated with the name of the tablelist widget and the column index of the respective label, and the resulting script is evaluated in the global scope.  If the tablelist's state is disabled then this action will not take place.  The most common value of this option is tablelist::addToSortColumns; this command adds the column index passed to it as second argument to the list of sort columns and sorts the items based on the columns indicated by the modified list.

Command-Line Name:  -labeldisabledforeground
Database Name:  labelDisabledForeground
Database Class:  DisabledForeground

Specifies the -disabledforeground option for the header labels, i.e., the foreground color to use for the labels when the tablelist's state is disabled.  This option is only defined in the Tablelist package if the Tk version being used supports the -disabledforeground option for label widgets.  This is checked by Tablelist at initialization time, and will normally be the case for Tk versions 8.3.1 or higher.  On the other hand, the Tablelist_tile package doesn't support the -labeldisabledforeground option.

Command-Line Name:  -labelfont
Database Name:  labelFont
Database Class:  Font

Specifies the -font option for the header labels.  In the package Tablelist_tile this option has a theme-specific default value.

Command-Line Name:  -labelforeground or -labelfg
Database Name:  labelForeground
Database Class:  Foreground

Specifies the -foreground option for the header labels.  In the package Tablelist_tile this option has a theme-specific default value.

Command-Line Name:  -labelheight
Database Name:  labelHeight
Database Class:  Height

Specifies the -height option for the header labels.  This option is only supported by the Tablelist package, but not by Tablelist_tile.

Command-Line Name:  -labelpady
Database Name:  labelPadY
Database Class:  Pad

In the Tablelist package this option specifies the -pady configuration option for the header labels.  In the Tablelist_tile package the value of the -labelpady option is mapped to the corresponding components of the value of the -padding configuration option of the header labels, and the -labelpady option has a theme-specific default value.

Command-Line Name:  -labelrelief
Database Name:  labelRelief
Database Class:  Relief

Specifies the -relief option for the header labels.  This option is different from the standard -relief option defined for the tablelist widget itself.  The default value is raised.

Command-Line Name:  -listvariable
Database Name:  listVariable
Database Class:  Variable

Specifies the name of a variable.  The value of the variable is a list to be displayed inside the widget; if the variable value changes then the widget will automatically update itself to reflect the new value.  The value of the variable must be a valid list.  Each list element corresponds to a row within the widget, and must be a valid list itself; its elements correspond to the cells within the respective row.  Attempts to assign a variable whose value does not fulfil these conditions to -listvariable will cause an error.  Attempts to unset a variable in use as a -listvariable will fail but will not generate an error.

REMARK:  For increased efficiency, updating the widget to reflect a changed value of the variable specified with this option is, whenever possible, done at idle time (i.e., when there are no events to process).  On the other hand, most tablelist subcommands make it necessary to perform an immediate update of the widget's internal list according to the value of this variable, before executing the subcommand in question.  Doing this repeatedly can become quite inefficient.  To avoid performance problems, you should always try to separate the operations that build up the value of the variable specified by this option from other commands.  For example, instead of

tablelist::tablelist .tbl ... -listvariable var
set var {}
for {set row 0} {$row < 1000} {incr row} {
    lappend var ...
    .tbl cellconfigure $row,3 -image ...
}

you should write

tablelist::tablelist .tbl ... -listvariable var
set var {}
for {set row 0} {$row < 1000} {incr row} {
    lappend var ...
}
for {set row 0} {$row < 1000} {incr row} {
    .tbl cellconfigure $row,3 -image ...
}

The first method above is quite inefficient, because it requires 1000 updates of the widget's internal list.  The second method performs incomparably faster, because it needs only one synchronization (at the beginning of the second loop).

Command-Line Name:  -movablecolumns
Database Name:  movableColumns
Database Class:  MovableColumns

Specifies a boolean value that determines whether the columns can be moved interactively.  See the DEFAULT BINDINGS FOR THE HEADER LABELS section below for information on moving a column interactively.  The default value is 0.

Command-Line Name:  -movablerows
Database Name:  movableRows
Database Class:  MovableRows

Specifies a boolean value that determines whether the rows can be moved interactively.  See the DEFAULT AND INDIVIDUAL BINDINGS FOR THE TABLELIST BODY section below for information on moving a row interactively.  The default value is 0.

Command-Line Name:  -movecolumncursor
Database Name:  moveColumnCursor
Database Class:  MoveColumnCursor

Specifies the mouse cursor to be used when moving a column interactively.  The default value is icon.

Command-Line Name:  -movecursor
Database Name:  moveCursor
Database Class:  MoveCursor

Specifies the mouse cursor to be used when moving a row interactively.  The default value is hand2.

Command-Line Name:  -protecttitlecolumns
Database Name:  protectTitleColumns
Database Class:  ProtectTitleColumns

Specifies a boolean value that determines whether the boundary of the title column area shall be protected from being crossed when moving a column interactively.  See the DEFAULT BINDINGS FOR THE HEADER LABELS section below for information on moving a column interactively.  The default value is 0, specifying that non-title columns can be moved into the title column area and vice-versa.

Command-Line Name:  -resizablecolumns
Database Name:  resizableColumns
Database Class:  ResizableColumns

Specifies a boolean value that determines whether the columns can be resized interactively.  See the DEFAULT BINDINGS FOR THE HEADER LABELS section below for information on interactive column resizing.  The default value is 1.

Command-Line Name:  -resizecursor
Database Name:  resizeCursor
Database Class:  ResizeCursor

Specifies the mouse cursor to be used during interactive column resizing.  The default value is sb_h_double_arrow.

Command-Line Name:  -selectmode
Database Name:  selectMode
Database Class:  SelectMode

Specifies one of several styles for manipulating the selection.  The value of the option may be arbitrary, but the default bindings expect it to be either single, browse, multiple, or extended.  The default value is browse.

Command-Line Name:  -selecttype
Database Name:  selectType
Database Class:  SelectType

Specifies one of two selection types for the tablelist widget: row or cell.  If the selection type is row then the default bindings will select and deselect entire items, and the whole row having the location cursor will be displayed as active when the tablelist has the keyboard focus.  If the selection type is cell then the default bindings will select and deselect individual elements, and the single cell having the location cursor will be displayed as active when the tablelist has the keyboard focus.  The default value is row.

Command-Line Name:  -setfocus
Database Name:  setFocus
Database Class:  SetFocus

Specifies a boolean value that determines whether a click with the left mouse button anywhere into the tablelist's body, including the separators and the embedded images (more precisely, any descendants of the tablelist widget having the binding tag TablelistBody) should set the focus to the body of the tablelist widget if the latter's state is normal.  The default value is 1.

Command-Line Name:  -showarrow
Database Name:  showArrow
Database Class:  ShowArrow

Specifies a boolean value that determines whether the sortbycolumn and sortbycolumnlist subcommands of the Tcl command associated with the widget should place an arrow indicating the sort order into the header label(s) of the column(s) specified by their first argument.  The default value is 1.

Command-Line Name:  -showlabels
Database Name:  showLabels
Database Class:  ShowLabels

Specifies a boolean value that determines whether the header labels are to be shown or not.  The default value is 1.

Command-Line Name:  -showseparators
Database Name:  showSeparators
Database Class:  ShowSeparators

Specifies a boolean value that determines whether the columns are to be separated with borders.  The default value is 0.  The separators are implemented as thin frames with sunken relief in the package Tablelist, and as tile separator widgets in the package Tablelist_tile.  They are attached to the right edges of the header labels, and are only created if the value of this option is true.  There is no support for horizontal separators in tablelist widgets, but a nice distinguishing effect for the rows can be achieved with the aid of the -stripebackground option discussed below.

Command-Line Name:  -snipstring
Database Name:  snipString
Database Class:  SnipString

Specifies the string to be used as snip indicator when displaying the elements that don't fit into their cells.  The default is an ellipsis ("...").

Command-Line Name:  -sortcommand
Database Name:  sortCommand
Database Class:  SortCommand

Specifies a command to be used for the comparison of the items when invoking the sort subcommand of the Tcl command associated with the tablelist widget.  To compare two items (viewed as lists of cell contents within one row each) during the sort operation, the command is automatically concatenated with the two items and the resulting script is evaluated.  The script should return an integer less than, equal to, or greater than zero if the first item is to be considered less than, equal to, or greater than the second, respectively.

Command-Line Name:  -spacing
Database Name:  spacing
Database Class:  Spacing

Specifies additional space to provide above and below each row of the widget.  The option's value may have any of the standard forms for screen distances.  It defaults to 0.

Command-Line Name:  -state
Database Name:  state
Database Class:  State

Specifies one of two states for the tablelist widget: normal or disabled.  If the widget is disabled then neither items nor columns may be inserted, deleted, updated, or moved, the items, header labels, and the up- or down-arrow are drawn in the -disabledforeground, -labeldisabledforeground, and -arrowdisabledcolor color, respectively, the selection cannot be modified and is not shown (although the selection information is retained), the header labels are completely insensitive, and no interactive cell editing can be performed.  In addition, in disabled state any color options specified at column, row, or cell level will be ignored.

Command-Line Name:  -stretch
Database Name:  stretch
Database Class:  Stretch

Specifies the columns to be stretched in order to fill the tablelist window if necessary.  The option's value may be all or a list of column indices in any of the forms described in the COLUMN INDICES section below.  In the second case, the specified column indices are replaced with their numerical equivalents, except for the index end, which is viewed as a dynamic column index whose numerical equivalent might change during program execution and therefore will be recomputed every time the columns are stretched.  The list will be updated automatically whenever columns are inserted, deleted, or moved.  The number of pixels by which a column is stretched is proportional to its width in pixels.  The default value of this option is an empty list, meaning that no column will be stretched to eliminate the blank space that might appear at the right of the table.  (Note that the blank space following the header labels is filled with a dummy, insensitive label having the same background, borderwidth, and relief as the "normal" header labels.)  This option is ignored if the value of the -width configuration option is zero or less.

Command-Line Name:  -stripebackground or -stripebg
Database Name:  stripeBackground
Database Class:  Background

Specifies the background color to use when displaying the items belonging to a stripe.  Each stripe is composed of the same number stripeHeight of consecutive non-hidden items, according to the value of the -stripeheight configuration option.  The first stripeHeight non-hidden items are "normal" ones; they are followed by a stripe composed of the next stripeHeight non-hidden items, which in turn is followed by the same number of "normal" non-hidden items, and so on.  In the Tablelist package and in most themes supported by Tablelist_tile, the default value is an empty string, indicating that the stripes will inherit the background color specified by the -background configuration option.  When using Tablelist_tile with the tileqt theme then the default value is given by the global KDE option alternateBackground, which in turn depends on the current color scheme.  In this case it is recommended to either keep that default value retrieved from KDE, or to use an explicitly specified empty string if no stripes are to be displayed.  The -stripebackground option has a higher priority than the -background column configuration option, but a lower priority than the -background option specified at row or cell level.

Command-Line Name:  -stripeforeground or -stripefg
Database Name:  stripeForeground
Database Class:  Foreground

Specifies the foreground color to use when displaying the items belonging to a stripe.  Each stripe is composed of the same number stripeHeight of consecutive non-hidden items, according to the value of the -stripeheight configuration option.  The first stripeHeight non-hidden items are "normal" ones; they are followed by a stripe composed of the next stripeHeight non-hidden items, which in turn is followed by the same number of "normal" non-hidden items, and so on.  The default value is an empty string, indicating that the stripes will inherit the foreground color specified by the -foreground configuration option.  The -stripeforeground option has a higher priority than the -foreground column configuration option, but a lower priority than the -foreground option specified at row or cell level.

Command-Line Name:  -stripeheight
Database Name:  stripeHeight
Database Class:  StripeHeight

Specifies the number of items in each stripe.  If zero or less then no stripes are displayed.  The default is 1.

Command-Line Name:  -takefocus
Database Name:  takeFocus
Database Class:  TakeFocus

This option determines whether the widget accepts the focus during keyboard traversal.  It is almost identical to the standard option of the same name (see the options manual entry for details).  The only difference is that not the widget itself but its body child (containing the items) will receive the focus during keyboard traversal with the standard keys (Tab and Shift-Tab).

Command-Line Name:  -targetcolor
Database Name:  targetColor
Database Class:  TargetColor

Specifies the color of the temporary gap displayed in the tablelist's body or header to indicate the target position when moving a row or column interactively.  The default value is black.

Command-Line Name:  -titlecolumns
Database Name:  titleColumns
Database Class:  TitleColumns

Specifies the number of the non-scrollable columns at the left edge of the window, also called title columns.  The positions of these columns will not change when adjusting the horizontal view by invoking the scan, seecell, seecolumn, or xview subcommand.  The default value is 0.  The value of this option also determines the scrolling unit used by the commands mentioned above when shifting the horizontal view: if it is positive then the horizontal scrolling is performed column-wise, otherwise by character units (the width of the 0 character).

The end of the title column area is visualized with the aid of a separator, attached to the right edge of the header label corresponding to the last non-hidden title column.  This special separator is always displayed to mark the end of the title columns (if any), independently of the value of the -showseparators option.  The user can easily distinguish it from the other separators by means of its background color, which is different from that of the other separator frames.

For technical reasons (the use of the -elide option for a text widget tag), this option is not supported for Tk versions earlier than 8.3.

Command-Line Name:  -tooltipaddcommand
Database Name:  tooltipAddCommand
Database Class:  TooltipAddCommand

Specifies a Tcl command to be used for displaying cell- and column label-specific balloon help.  When the mouse pointer enters a cell, the command is automatically concatenated with the name of the tablelist widget and the cell's row and column indices, and the resulting script is evaluated in the global scope.  Similarly, when the mouse pointer enters a header label, the command is automatically concatenated with the name of the tablelist widget, the number -1, and the column index of the respective label, and the resulting script is evaluated in the global scope.  In both cases, the action described above is only triggered if both the value of this option and that of -tooltipdelcommand are nonempty strings.

For example, consider the procedure tooltipAddCmd shown below, which makes use of the DynamicHelp::add command from the BWidget package to display the full cell and label texts as tooltips for the cells and header labels with snipped contents.

proc tooltipAddCmd {tbl row col} {
    if {($row >= 0 && [$tbl iselemsnipped $row,$col fullText]) ||
        ($row <  0 && [$tbl istitlesnipped $col fullText])} {
        DynamicHelp::add $tbl -text $fullText
    }
}

A tablelist widget can use this procedure by specifying

... -tooltipaddcommand tooltipAddCmd -tooltipdelcommand DynamicHelp::delete

If you prefer to use the tooltip::tooltip command from the tooltip package contained in tklib then the procedure becomes

proc tooltipAddCmd {tbl row col} {
    if {($row >= 0 && [$tbl iselemsnipped $row,$col fullText]) ||
        ($row <  0 && [$tbl istitlesnipped $col fullText])} {
        tooltip::tooltip $tbl $fullText
    }
}

and can be used by specifying

... -tooltipaddcommand tooltipAddCmd -tooltipdelcommand "tooltip::tooltip clear"

Please note that in the less common case that the name of your tablelist widget contains spaces, the tooltip::tooltip clear command won't work as expected.  As a workaround you can use the slightly modified approach shown below:

proc tooltipDelCmd tbl { tooltip::tooltip $tbl "" }

... -tooltipaddcommand tooltipAddCmd -tooltipdelcommand tooltipDelCmd

Both examples above make use of the iselemsnipped and istitlesnipped subcommands, to make sure that the full cell and label texts will only be displayed for those cells and header labels whose contents are snipped.

Command-Line Name:  -tooltipdelcommand
Database Name:  tooltipDelCommand
Database Class:  TooltipDelCommand

Specifies a Tcl command to be used for removing the cell- or column label-specific balloon help.  When the mouse pointer leaves a cell or a header label, the command specified by this option is automatically concatenated with the name of the tablelist widget and the resulting script is evaluated in the global scope.  This action is only triggered if both the value of this option and that of -tooltipaddcommand are nonempty strings.  Common values for this option are "DynamicHelp::delete" (which requires the BWidget package) and  "tooltip::tooltip clear"  (which requires the tooltip package contained in tklib).  Their usage is shown in the examples above.

Command-Line Name:  -width
Database Name:  width
Database Class:  Width

Specifies the desired width for the window, in average-size characters of the widget's font.  If zero or less then the desired width for the window is made just large enough to hold all the columns in the tablelist widget.

DESCRIPTION
The tablelist::tablelist command creates a new window named pathName and of the class Tablelist, and makes it into a tablelist widget.  Additional options, described above, may be specified on the command line or in the option database to configure aspects of the tablelist such as its colors, font, and columns.  The tablelist::tablelist command returns its pathName argument.  At the time this command is invoked, there must not exist a window named pathName, but pathName's parent must exist.

A tablelist is a multi-column listbox, implemented as a mega-widget, consisting of a body and a header.  The body displays a list of items, one per line.  Each item is a list of elements, which are aligned in columns.  In other words, an item is the contents of a row, and an element is the text contained in a cell.  The header consists of label widgets displaying the column titles.  The labels can be used, among others, for interactive column resizing and column-based sorting of the items, as described below.

Each cell and each header label of a tablelist widget can also contain an image, which is placed to the left or right of the text, depending on the column's alignment.  Instead of an image, a tablelist cell can also contain an embedded window, placed to the left or right of the text, just like an embedded image.

The elements of a tablelist widget can, per default, be only edited programmatically.  However, interactive editing can be enabled for individual cells and for entire columns.  Per default, the interactive cell editing uses a temporary embedded entry widget, thus making sure that all the validation facilities available for entry widgets can be used during the editing process.  A great variety of widgets from the packages BWidget, Iwidgets, combobox (by Bryan Oakley), and Mentry (or Mentry_tile), as well as Tk core text, spinbox and checkbutton widgets along with tile entry, combobox, and checkbutton widgets are also supported as temporary embedded widgets used for cell editing.  In addition, a rich set of keyboard bindings is provided for a comfortable navigation between the editable cells.

When first created, a new tablelist widget has no items.  Items may be added, deleted, or updated using widget commands described below.  In addition, one or more items or elements may be selected.  If a tablelist widget is exporting its selection (see the -exportselection option), then it will observe the standard X11 protocols for handling the selection.  Tablelist widget selections are available as types STRING and UTF8_STRING; the value of the selection will be a text built by taking all of the rows having at least one non-hidden selected element, joining these elements together with tabs, and the resulting strings in turn with newlines.  If a tablelist widget that is exporting its selection is the selection owner and some other window claims ownership of the selection away from it, then the virtual event <<TablelistSelectionLost>> is generated.

It is not necessary for all the elements to be displayed in the tablelist widget at once; commands described below may be used to change the view in the window.  Tablelist widgets allow scrolling in both directions using the standard -xscrollcommand and -yscrollcommand options.  They also support scanning, as described below.

Each tablelist widget, as well as each tablelist column, row, and cell may have any number of attributes, which can be used in commands that create or manipulate tablelist widgets for particular purposes.

COLORS AND FONTS
The -background, -font, -foreground, -selectbackground, and -selectforeground options can also be specified at column, row, and cell level, by using the columnconfigure, rowconfigure, and cellconfigure subcommands of the Tcl command associated with the tablelist widget.  For this reason, a particular cell can have up to four values for one and the same color or font option.  If these values conflict, then the option specified at the highest priority level is used.  The decreasing priority order is cell, row, column, widget. 

If one of these options hasn't been specified at cell, row, or column level, or if its value for that level is an empty string (this is explicitly allowed), then that option will not be used at that particular level.

COLUMN CONFIGURATION OPTIONS
The following options are currently supported by the columncget, columnconfigure, configcolumnlist, and configcolumns commands:

-align alignment
Specifies how to align the elements of the column.  It must be one of left, right, or center.  This option also refers to the column's title if the -labelalign option hasn't been specified for the given column, or if its value is an empty string.  The -align option is tied to the alignment element corresponding to this column in the list specifying the value of the -columns option for the tablelist widget; changes in either will automatically be reflected in the other.

-background color or -bg color
Specifies the normal background color to use when displaying the contents of the column.

-changesnipside boolean
Specifies whether to override the alignment-specific default position of the snip indicator when displaying the elements of the column (excluding its title).  The default value is 0, meaning that the snip string will be appended to the elements if the column's alignment is left or center and prepended to them in case the alignment is right.

-editable boolean
Specifies whether the elements of the column can be edited interactively.  The default value is 0.  The value of this option can be overridden for individual cells by using the cell configuration option of the same name.

-editwindow name
Specifies the type of the temporary embedded widget to be used for interactive editing of the contents of the given column's cells.  name may be one of entry (which is the default), text, spinbox (the latter for Tk version 8.4 or higher), checkbutton, ttk::entry, ttk::combobox, or ttk::checkbutton (the latter three only in the presence of the tile widget engine), or the value returned by one of the registration commands for widgets from the packages BWidget, Iwidgets, combobox (by Bryan Oakley), and Mentry (or Mentry_tile).  For example, you can use  -editwindow ComboBox  after registering the ComboBox widget for interactive cell editing with the aid of the tablelist::addBWidgetComboBox command.  Similarly, you can use  -editwindow combobox  after registering Bryan Oakley's combobox widget for interactive cell editing by invoking the tablelist::addOakleyCombobox command.  The value of this option can be overridden for individual cells by using the cell configuration option of the same name.

-font font
Specifies the font to use when displaying the contents of the column.

-foreground color or -fg color
Specifies the normal foreground color to use when displaying the contents of the column.

-formatcommand command
Specifies a Tcl command to be invoked when displaying the contents of a cell within this column or adding them to the selection when the latter is being exported.  If command is a nonempty string, then it is automatically concatenated with the cell's text, the resulting script is evaluated in the global scope, and the return value is displayed in the cell or added to the selection instead of the original data.  For example, if a time value in seconds is being inserted into the cell and command is the procedure formatDate defined as 
proc formatDate clockVal {
    return [clock format $clockVal -format "%Y-%m-%d"]
}

then the text displayed in the cell will be the date in the specified format, not the time value in seconds.  Notice that this option is only used for preparing the text to be displayed or returned when exporting the selection, and does not affect the internal cell contents.  For example, the get, getcolumns, getcells, rowcget, columncget, cellcget, sort, sortbycolumn, and sortbycolumnlist subcommands all operate on the original cell text, which is contained in the widget's internal list.  In the case of the above example, this will make it possible to sort the items very easily by time, with a second's precision, even if their visual representation only contains the year, month, and day.

The -formatcommand option comes in handy if only images or embedded windows are to be displayed in a column but the texts associated with the cells may not simply be empty strings because they are needed for other purposes (like sorting or editing).  In such cases, a procedure returning an empty string can be used as the option's value, thus making sure that the textual information contained in that column remains hidden.

In the more sophisticated case that the result of the formatting should also depend on the cell's row, you will have to invoke the formatinfo subcommand, which provides the necessary information about the cell whose content is being formatted.

-hide boolean
Specifies whether to hide the column when displaying the widget or exporting its selection.  The default value is 0.  After toggling the hidden state of a column, the <<TablelistColHiddenStateChanged>> virtual event is generated.

-labelalign alignment
Specifies how to align the column's title.  It must be one of left, right, or center, or an empty string.  If this option hasn't been specified for the given column, or if its value is an empty string, then the header title will have the same alignment as the elements of the column, as given by the -align column configuration option or by the alignment element corresponding to this column in the list specifying the value of the -columns global option.

-labelbackground color or -labelbg color
-labelborderwidth screenDistance or -labelbd screenDistance
-labelcommand command
-labelcommand2 command
-labelfont fontName
-labelforeground color or -labelfg color
-labelheight lines
-labelpady screenDistance
-labelrelief relief
The value of each of these options may also be an empty string.  These options are the column-specific equivalents of the global ones having the same names, described in the WIDGET-SPECIFIC OPTIONS section.  They override the options of the same names set at widget level if the specified value is not empty.  If one of these options hasn't been specified for the given column, or if its value is an empty string, then that option will not be used at column level; the global option of the same name will be used instead.  The -labelactivebackground, -labelactiveforeground, and -labeldisabledforeground options are only defined at widget level; there are no column configuration options with these names.  The -labelheight option is only supported by the Tablelist package, but not by Tablelist_tile.

-labelimage image
Specifies the name of the Tk image to be displayed in the header label.  image must be the result of an invocation of the  image create  command, or an empty string, specifying that no image is to be displayed.  If the label's text is right-aligned then the image will be displayed to the right of the text, otherwise to its left.  The text and the image are separated from each other by a gap corresponding to the width of a space character in the given label's font.

-maxwidth width
width must be a number.  A positive value specifies the column's maximum width in average-size characters of the widget's font.  If width is negative, its absolute value is interpreted as a maximum column width in pixels.  Finally, a value of zero (which is the default) specifies that the column's maximum width is to be made just large enough to hold all the elements in the column, including its header.  This option is only relevant if the given column has dynamic width, i.e., if its width was set to 0.

-name name
Specifies a name associated with the column.  While the numerical index of a column might change by inserting, deleting, or moving columns, its name remains constant and can be used as a safe alternative column index (see the COLUMN INDICES section for details).  Similarly, it can also be used as the second component of a cell index of the form row,col, as described in the CELL INDICES section.  To avoid ambiguities, column names should be different from any other forms of column indices (like numbers, active, anchor, end, or any of their abbreviations).  They should also be different from (any abbreviations of) the string all, which may be specified as the value of the -stretch configuration option.  The default value is an empty string.

-resizable boolean
Specifies whether the column can be resized interactively.  See the DEFAULT BINDINGS FOR THE HEADER LABELS section for information on interactive column resizing.  The default value is 1.  This option is only relevant if the value of the -resizablecolumns widget configuration option is true.

-selectbackground color
Specifies the background color to use when displaying the contents of a cell in the given column while the cell is selected.

-selectforeground color
Specifies the foreground color to use when displaying the contents of a cell in the given column while the cell is selected.

-showarrow boolean
Specifies whether the sortbycolumn command with the given column index as first argument and the sortbycolumnlist command having the given column index as element of its first argument should place an arrow indicating the sort order into the column's label.  The default value is 1.  This option is only relevant if the value of the -showarrow widget configuration option is true.

-showlinenumbers boolean
Specifies whether the given column should display the line numbers (starting with 1 and ending with the number of the non-hidden rows).  The default value is 0.

The following details assume that the given column's -showlinenumbers option was set to true:  Associating the line numbers with the non-hidden rows takes place automatically whenever items are inserted, deleted, updated, moved, or sorted.  For increased efficiency, this is in most cases done at idle time.  For example, if several items are inserted into or deleted from the tablelist widget, then the necessary renumbering of the non-hidden rows will be performed as an idle callback, the next time the event loop is entered and there are no events to process.  The line numbers will override any previous contents of the column's cells.  They are, per default, displayed without leading zeros, but this (and the display format in general) can be changed with the aid of the -formatcommand column configuration option.

The sortbycolumn and sortbycolumnlist subcommands as well as the tablelist::sortByColumn and tablelist::addToSortColumns commands check the column indices passed to them as arguments and don't perform any sorting by those columns that have been configured to display the line numbers (see the corresponding descriptions for details).

-sortcommand command
This option is only relevant if the value of the -sortmode option for the given column is command.  It specifies a command to be used for the comparison of the column's elements when invoking the sortbycolumn command with the given column index as first argument or the sortbycolumnlist command having the given column index as element of its first argument.  To compare two elements during the sortbycolumn or sortbycolumnlist operation, command is automatically concatenated with the two elements and the resulting script is evaluated.  The script should return an integer less than, equal to, or greater than zero if the first element is to be considered less than, equal to, or greater than the second, respectively.

-sortmode mode
Specifies how to compare the column's elements when invoking the sortbycolumn command with the given column index as first argument or the sortbycolumnlist command having the given column index as element of its first argument.  mode may have any of the following values:
 
ascii Use string comparison with ASCII collation order.  This is the default.
 
command Use the command specified by the -sortcommand column configuration option to compare the column's elements.
 
dictionary Use dictionary-style comparison.  This is the same as ascii, except: (a) case is ignored except as a tie-breaker; (b) if two strings contain embedded numbers, the numbers compare as integers, not characters.  For example, bigBoy sorts between bigbang and bigboy, and x10y sorts between x9y and x11y.
 
integer Convert the elements to integers and use integer comparison.
 
real Convert the elements to floating-point values and use floating-point comparison.

-stretchable boolean
Specifies whether the column is to be stretched in order to fill the tablelist window if necessary.  The value of this option is tied to that of the -stretch option for the tablelist widget; changes in either will automatically be reflected in the other.

-text list
Specifies a list of strings to be displayed in the cells of the given column, i.e., updates the elements contained in the column.  If the tablelist's state is disabled then this option will be ignored.

-title title
Specifies the text to be displayed in the column's header.  This option is tied to the title element corresponding to the given column in the list specifying the value of the -columns option for the tablelist widget; changes in either will automatically be reflected in the other.

-width width
width must be a number.  A positive value specifies the column's width in average-size characters of the widget's font.  If width is negative, its absolute value is interpreted as a column width in pixels.  Finally, a value of zero specifies that the column's width is to be made just large enough to hold all the elements in the column, including its header (but no larger than the maximum width indicated by the -maxwidth column configuration option).  This option is tied to the width element corresponding to the given column in the list specifying the value of the -columns option for the tablelist widget; changes in either will automatically be reflected in the other.

-wrap boolean
Specifies whether to display those elements of the given column that don't fit into their cells in word-wrapped multi-line rather than snipped form.  The default value is 0.  If the specified column has static width and the value of this option is true then elements of the column that are too long to be displayed in a single line will be broken up into several lines.  The same applies to the individual lines of the multi-line elements (i.e., elements containing newline characters): they will also be wrapped if necessary, thus giving rise to additional line breaks.  In both cases, the line breaks are chosen at word boundaries wherever possible, and they are only used for the external representation of the strings contained in the given column, without affecting the internal contents of the cells.

The -background, -font, -foreground, -selectbackground, and -selectforeground column configuration options override the options of the same names set at widget level (but not the ones set at cell or row level) if the specified value is not an empty string.  See the COLORS AND FONTS section for further details on these options.

ROW CONFIGURATION OPTIONS
The following options are currently supported by the rowcget, rowconfigure, configrowlist, and configrows commands:

-background color or -bg color
Specifies the normal background color to use when displaying the contents of the row.

-font font
Specifies the font to use when displaying the contents of the row.

-foreground color or -fg color
Specifies the normal foreground color to use when displaying the contents of the row.

-hide boolean
Specifies whether to hide the row when displaying the widget or exporting its selection.  The default value is 0.  After toggling the hidden state of a row, the <<TablelistRowHiddenStateChanged>> virtual event is generated.  For technical reasons (the use of the -elide option for a text widget tag), this option is not supported for Tk versions earlier than 8.3.

CAUTION:  Tk versions 8.3 - 8.4.12 had a bug that caused a segmentation fault if the whole content of a text widget was elided.  This bug was also present in Tk 8.5.a1 - 8.5.a3.  When using one of these earlier Tk versions, this bug will produce a crash if all the rows of a tablelist widget are hidden.  It is your responsibility to avoid such situations when using a Tk version having this bug!

-name name
Specifies a name associated with the row.  While the numerical index of a row might change by inserting, deleting, or moving rows, or by sorting the items, its name remains constant and can be used as a safe alternative row index (see the ROW INDICES section for details).  Similarly, it can also be used as the first component of a cell index of the form row,col, as described in the CELL INDICES section.  To avoid ambiguities, row names should be different from any other forms of row indices (like numbers, keys, active, anchor, end, or any of their abbreviations).  The default value is an empty string.

-selectable boolean
Specifies whether the elements displayed in the given row can be selected.  The default value is 1.  If the value 0 was given then any attempt to select the item contained in this row with the aid of the  selection set  widget command or any of its elements by using the  cellselection set  command will be silently ignored; moreover, an existing old (cell) selection is removed from the row.

-selectbackground color
Specifies the background color to use when displaying the contents of a cell in the given row while the cell is selected.

-selectforeground color
Specifies the foreground color to use when displaying the contents of a cell in the given row while the cell is selected.

-text list
Specifies a list of strings to be displayed in the cells of the given row, i.e., updates the item contained in the row.  If the tablelist's state is disabled then this option will be ignored.

The -background, -font, -foreground, -selectbackground, and -selectforeground row configuration options override the options of the same names set at column or widget level (but not the ones set at cell level) if the specified value is not an empty string.  See the COLORS AND FONTS section for further details on these options.

CELL CONFIGURATION OPTIONS
The following options are currently supported by the cellcget, cellconfigure, configcelllist, and configcells commands:

-background color or -bg color
Specifies the normal background color to use when displaying the contents of the cell.

-editable boolean
Specifies whether the contents of the cell can be edited interactively.  The default value is 0.  This option overrides the one of the same name for the column containing the given cell.

-editwindow name
Specifies the type of the temporary embedded widget to be used for interactive editing of the cell's contents.  The default value is entry.  This option overrides the one of the same name for the column containing the given cell, and may have the same values as its column-related counterpart.

-font font
Specifies the font to use when displaying the contents of the cell.

-foreground color or -fg color
Specifies the normal foreground color to use when displaying the contents of the cell.

-image image
Specifies the name of the Tk image to be displayed in the cell.  image must be the result of an invocation of the  image create  command, or an empty string, specifying that no image is to be displayed.  If the column containing the cell is right-aligned then the image will be displayed to the right of the cell's text, otherwise to its left.  The text and the image are separated from each other by a gap of 4 pixels.  If for the same cell the -window option was specified with a nonempty value then it overrides the -image option.  If the tablelist's state is disabled then this option will be ignored.

To display an image in a cell, Tablelist makes use of an embedded label widget (which is created on demand).  This requires more memory than inserting the image directly into the tablelist's body, but has the main advantage of making it possible to adjust the width of the label containing the widget to fit into its column.  This has the visual effect of cutting off part of the image from its right side.  To make sure that images with transparent background will be displayed correctly, the background color of the label widgets containing the embedded images is automatically updated whenever necessary.

-selectbackground color
Specifies the background color to use when displaying the contents of the cell while it is selected.

-selectforeground color
Specifies the foreground color to use when displaying the contents of the cell while it is selected.

-stretchwindow boolean
Specifies whether the width of the window embedded into the cell shall be adapted dynamically to the width of the cell's column if the latter is non-zero (i.e., static).  The default value is 0.  If the value of this option is true and the column was specified with a non-zero width or was resized interactively, then the width of the embedded window (if any) will be adjusted automatically so the window fills the whole horizontal space belonging to that column (except the left and right margins).  Please note that in this case the cell's text will remain hidden.  On the other hand, if the column is of dynamic width then this option will be ignored and both the cell's text and its embedded window (if any) will be displayed as usual.  The easiest way to avoid this discrepancy is to set the cell's text to an empy string or make sure that the column's elements are always displayed as empty strings, by using the -formatcommand column configuration option.

-text text
Specifies the string to be displayed in the given cell, i.e., updates the element contained in the cell.  If the tablelist's state is disabled then this option will be ignored.

-window command
Specifies a Tcl command creating the window to be embedded into the cell.  The command is automatically concatenated with the name of the tablelist widget, the cell's row and column indices, as well as the path name of the embedded window to be created, and the resulting script is evaluated in the global scope.  command may also be an empty string, specifying that no embedded window is to be displayed.  If the column containing the cell is right-aligned then the window will be displayed to the right of the cell's text, otherwise to its left.  The text and the window are separated from each other by a gap of 4 pixels.  If this option was specified with a nonempty value then it overrides the -image cell configuration option.  If the tablelist's state is disabled then this option will be ignored.

There are several situations where the embedded window will be destroyed and later recreated by invoking the script mentioned above.  For example, when changing the value of some of the tablelist widget or column configuration options, sorting the items, or moving a row or a column, the widget's contents will be redisplayed, which makes it necessary to recreate the embedded windows.  This operation won't preserve the changes made on the embedded windows after their creation.  For this reason, you should avoid any changes on embedded windows outside their creation scripts.

-windowdestroy command
Specifies a Tcl command to be invoked when a window embedded into the cell is destroyed.  The command is automatically concatenated with the name of the tablelist widget, the cell's row and column indices, as well as the path name of the embedded window, and the resulting script is evaluated in the global scope.  This option provides an easy-to-use alternative to binding a script to the embedded window's <Destroy> event from within its creation script, specified as the value of the -window cell configuration option.

The -background, -font, -foreground, -selectbackground, and -selectforeground cell configuration options override the options of the same names set at row, column, or widget level if the specified value is not an empty string.  See the COLORS AND FONTS section for further details on these options.

INTERACTIVE CELL EDITING
Whether or not the contents of a cell of a tablelist widget can be edited interactively, depends on the -editable option on both cell and column level.  If the cell-level option was set explicitly then its value determines the editability of the cell's contents.  Otherwise the value of the column-level option is used to decide whether the cell can be edited interactively.  From this rule it follows that you can enable interactive cell editing for a whole column by setting its -editable option to true.  To exclude some of the column's cells from interactive editing, set their -editable option to false.

The interactive cell editing is started by the editcell subcommand, which is invoked implicitly by clicking with the left mouse button into an editable cell or using keyboard navigation to move from one editable cell into another.  If the selection type is cell and the location cursor is in an editable cell, then the interactive editing of the active element can also be started by pressing Return or KP_Enter.  Per default, the editcell subcommand creates a temporary entry widget and embeds it into the cell whose index was passed to it as argument.  You can, however, use the -editwindow column or cell configuration option to specify another widget instead of an entry, like a Tk core text, spinbox, or checkbutton widget, or a tile entry, combobox, or checkbutton, or one of the 16 currently supported widgets from the packages BWidget, Iwidgets, combobox (by Bryan Oakley), and Mentry (or Mentry_tile).  Before specifying a widget from one of these library packages as the value of the -editwindow column or cell configuration option, you must register it for interactive cell editing by invoking the corresponding tablelist::add* command.  The Tk core entry, text, spinbox, and checkbutton widgets, as well as the tile entry, combobox, and checkbutton widgets are automatically registered for cell editing.

In the simplest case, the text automatically inserted into the temporary embedded widget is the same as the text displayed in the cell, which in turn can be the cell's contents or the string obtained from the latter by using the -formatcommand option of the cell's column.  However, if the value of the -editstartcommand configuration option is a nonempty string, then the text displayed in the cell is passed to that command as its last argument (following the tablelist's path name as well as the cell's row and column indices), the resulting script is evaluated in the global scope, and the return value becomes the edit window's contents.  From within this script you can invoke the cancelediting subcommand, which destroys the temporary embedded widget and cancels the editing of its contents.  The main goal of this script is, however, to enable you to define validations for the editing process.  This can be done either with the aid of the options for entry validation, supported by Tk versions 8.3 and higher (see the entry reference page), or by using the widget callback package Wcb, available for Tk versions 8.0 and higher.  The Iwidgets package (available for Tk versions 8.0 or higher) provides its own validation facilities, which can equally be used if the edit window is a widget belonging to that extension.  In either case, you will need the path name of the temporary embedded widget or that of its entry or entry-like component; use the editwinpath and entrypath subcommands to get these path names.  Another purpose of the command indicated by the -editstartcommand option is to enable you to prepare the edit window in various other ways.  For example, if the latter is a combobox widget then you can set its -editable option to false or (for a tile combobox) set its state to readonly, and you will have to populate its listbox component.  In the same script, you can change some of the embedded widget's visual attributes (like its background, selection background, or selection foreground color).  (Notice that this can also be done with the aid of the Tk option database.)

The editing of the text inserted into the edit window uses the widget-specific bindings for mouse and keyboard events, with a few extensions and changes, as described in the DEFAULT BINDINGS FOR INTERACTIVE CELL EDITING section.  For example, in entry or entry-like components of the edit window, Control-i inserts a tab, Control-j inserts a newline, and if the edit window is a text widget then Return and KP_Enter insert a newline character, too.  Tab and Shift-Tab are used for navigation between the editable cells, just like Alt-Left, Alt-Right, Alt-Up, Alt-Down, Alt-Prior, Alt-Next, Alt-Home, and Alt-End (as well as Control-Home and Control-End, except in the case of a text widget).  On Mac OS Classic and Mac OS X Aqua the Command key is used instead of Alt.  The editing can be aborted with the Escape key (or by invoking the cancelediting subcommand) and terminated normally with Return or KP_Enter (together with Control for a text widget).  The bindings for the keys used for normal termination of the editing just invoke the finishediting subcommand; the latter can also be called explicitly to terminate the editing programmatically.  Normal termination is also triggered by clicking with the left mouse button anywhere in the tablelist's body, outside the cell just being edited, or moving into another editable cell by using keyboard navigation.

When normal termination of the editing process occurs, the Tcl command associated with the tablelist widget compares the edit window's final contents to its original one.  If they are equal then the embedded widget is destroyed and the cell's original value is restored.  If the two strings are different and the value of the -editendcommand configuration option is a nonempty string, then the edit window's final text is passed to that command as its last argument (following the tablelist's path name as well as the cell's row and column indices), the resulting script is evaluated in the global scope, and the return value becomes the cell's new internal contents after destroying the temporary embedded widget.  The main goal of this script is to enable you to do a final validation of the edit window's contents.  From within this script you can invoke the rejectinput subcommand, which prevents the script's return value from becoming the cell's new contents; this subcommand also prevents the destruction of the temporary embedded widget.  Another purpose of the command indicated by the -editendcommand option is to convert the edit window's text to the cell's new internal contents, which is necessary if, due to the -formatcommand column configuration option, the cell's internal value is different from its external representation.  See the description of the -forceeditendcommand option for more about the invocation of the command mentioned above.

ROW INDICES
Many of the widget commands for tablelist widgets take one or more row indices as arguments.  A row index specifies a particular item of the tablelist, in any of the following ways:
 
number Specifies the item as a numerical index, where 0 corresponds to the first item in the tablelist.
 
knumber Specifies the item by its full key, composed of the letter k and the sequence number associated with the item, as returned by the getkeys widget command.
 
active Indicates the item containing the element that has the location cursor.  Depending on the selection type, this item as a whole or just its element having the location cursor will be displayed according to the value of the -activestyle configuration option when the tablelist has the keyboard focus.  This item is specified with the activate widget command or as the row containing the element specified with the activatecell widget command.
 
anchor Indicates the anchor point for the row selection, which is set with the  selection anchor  widget command, or the row containing the anchor point for the cell selection, which is set with the  cellselection anchor  widget command.
 
end Indicates the end of the tablelist.  For most commands this refers to the last item in the tablelist, but for a few commands such as index, insert, and insertlist, as well as for the target of the move command it refers to the item just after the last one.
 
@x,y Indicates the item that covers the point in the tablelist window specified by x and y (in pixel coordinates).  If no item covers that point, then the closest item to that point is used.  The coordinates x and y are expected to be relative to the tablelist window itself (not its body component).
 
name Specifies the row by the value of its -name configuration option.  name must be different from all the above row indices, and should be unique (if several rows have the same name then this value is considered to indicate the first matching row).

In the widget command descriptions below, arguments named index, first, last, source, and target always contain row indices in one of the above forms.

COLUMN INDICES
Many of the widget commands for tablelist widgets take a column index as argument.  A column index specifies a particular column of the tablelist, in any of the following ways:
 
number Specifies the column as a numerical index, where 0 corresponds to the first column in the tablelist.
 
active Indicates the column containing the element that has the location cursor.  If the selection type is cell then this element will be displayed according to the value of the -activestyle configuration option when the tablelist has the keyboard focus.  This element is specified with the activatecell widget command.
 
anchor Indicates the column containing the anchor point for the cell selection, which is set with the  cellselection anchor  widget command.
 
end Indicates the last column of the tablelist, except for the commands insertcolumns and insertcolumnlist, as well as for the target of the movecolumn command, in which cases it refers to the column just after the last one.
 
@x,y Indicates the column that covers the point in the tablelist window specified by x and y (in pixel coordinates).  If no column covers that point, then the closest column to that point is used.  The coordinates x and y are expected to be relative to the tablelist window itself (not its body component).
 
name Specifies the column by the value of its -name configuration option.  name must be different from all the above column indices, and should be unique (if several columns have the same name then this value is considered to indicate the first matching column).

In the widget command descriptions below, arguments named columnIndex, firstColumn, lastColumn, sourceColumn, and targetColumn always contain column indices in one of the above forms.

CELL INDICES
Many of the widget commands for tablelist widgets take a cell index as argument.  A cell index specifies a particular cell of the tablelist, in any of the following ways:
 
row,col Indicates the cell having the row index row and column index col.  row may be a number, a full key (of the form knumber), active, anchor, end (where the latter indicates the last row in the tablelist), or a row name.  col may be a number, active, anchor, end, or a column name.
 
active Indicates the element that has the location cursor.  If the selection type is cell then this element will be displayed according to the value of the -activestyle configuration option when the tablelist has the keyboard focus.  This element is specified with the activatecell widget command.
 
anchor Indicates the anchor point for the cell selection, which is set with the  cellselection anchor  widget command.
 
end Indicates the last cell in the last row of the tablelist.
 
@x,y Indicates the cell that covers the point in the tablelist window specified by x and y (in pixel coordinates).  If no cell covers that point, then the closest cell to that point is used.  The coordinates x and y are expected to be relative to the tablelist window itself (not its body component).

In the widget command descriptions below, arguments named cellIndex, firstCell, and lastCell always contain cell indices in one of the above forms.

WIDGET COMMAND
The tablelist::tablelist command creates a new Tcl command whose name is pathName.  This command may be used to invoke various operations on the widget.  It has the following general form: 
pathName option ?arg arg ...?
option and the args determine the exact behavior of the command.  The following commands are possible for tablelist widgets:

pathName activate index
Sets the active item to the one indicated by index if the tablelist's state is not disabled.  If index is outside the range of items in the tablelist or it refers to a hidden item then the closest non-hidden item is activated.  The active item is drawn as specified by the -activestyle configuration option when the widget has the input focus and the selection type is row.  Its index may be retrieved with the index active.  Returns an empty string.

pathName activatecell cellIndex
Sets the active element to the one indicated by cellIndex if the tablelist's state is not disabled.  If cellIndex is outside the range of elements in the tablelist or it refers to a hidden element, then the closest non-hidden element is activated.  The active element is drawn as specified by the -activestyle configuration option when the widget has the input focus and the selection type is cell.  Its index may be retrieved with the cell index active.  Returns an empty string.

pathName attrib ?name? ?value name value ...?
Queries or modifies the attributes of the widget.  If no name is specified, the command returns a list of pairs, each of which contains the name and the value of an attribute for pathName.  If name is specified with no value, then the command returns the value of the one named attribute, or an empty string if no corresponding value exists (you can use the hasattrib subcommand to distinguish this case from the one that the value of an existing attribute is an empty string).  If one or more name-value pairs are specified, then the command sets the given widget attribute(s) to the given value(s); in this case the return value is an empty string.  name may be an arbitrary string.

pathName bbox index
Returns a list of four numbers describing the bounding box of the row given by index.  The first two elements of the list give the x and y coordinates of the upper-left corner of the screen area covered by the row (specified in pixels relative to the widget) and the last two elements give the width and height of the area, in pixels.  If no part of the row given by index is visible on the screen, or if index refers to a non-existent row, then the result is an empty string; if the row is partially visible, the result gives the full area of the row, including any parts that are not visible.

pathName bodypath
Returns the path name of the body component of the widget.

pathName bodytag
Returns the name of a binding tag whose name depends on the path name of the tablelist widget and which is associated with the tablelist's body, the separators, as well as the message and label widgets used for displaying multi-line elements and images, respectively.  This binding tag precedes the tag TablelistBody in the list of binding tags of the tablelist descendants mentioned above, and is designed to be used when defining individual binding scripts for tablelist widgets.  The main advantage of using this tag instead of the path name of the tablelist's body is that it enables you to write event handling scripts that are valid not only for the tablelist's body but also for the separators, multi-line cells, and embedded images.

pathName cancelediting
This subcommand cancels the interactive editing of the contents of the cell whose index was passed to the editcell subcommand, destroys the temporary widget embedded into the cell, and restores the original cell contents.  This command enables you to cancel the interactive cell editing from within the Tcl command specified by the -editstartcommand configuration option if that pre-edit callback encounters an error when preparing the text to be inserted into the edit window.  The command is also invoked implicitly by pressing the Escape key when a cell is being edited.  The return value is an empty string.  Immediately before returning this value, the command generates the virtual event <<TablelistCellRestored>>.  If no cell was being edited when the command was invoked then an empty string is returned without generating a virtual event.

pathName cellattrib cellIndex ?name? ?value name value ...?
Queries or modifies the attributes of the cell given by cellIndex.  If no name is specified, the command returns a list of pairs, each of which contains the name and the value of an attribute for the cell.  If name is specified with no value, then the command returns the value of the one named cell attribute, or an empty string if no corresponding value exists (you can use the hascellattrib subcommand to distinguish this case from the one that the value of an existing cell attribute is an empty string).  If one or more name-value pairs are specified, then the command sets the given cell attribute(s) to the given value(s); in this case the return value is an empty string.  name may be an arbitrary string.

pathName cellcget cellIndex option
Returns the current value of the cell configuration option given by option for the cell specified by cellIndex.  option may have any of the values accepted by the cellconfigure command.

pathName cellconfigure cellIndex ?option? ?value option value ...?
Queries or modifies the configuration options of the cell given by cellIndex.  If no option is specified, the command returns a list describing all of the available options for the cell (see Tk_ConfigureInfo for information on the format of this list).  If option is specified with no value, then the command returns a list describing the one named option (this list will be identical to the corresponding sublist of the value returned if no option is specified).  If one or more option-value pairs are specified, then the command modifies the given cell option(s) to have the given value(s); in this case the return value is an empty string.  option may have any of the values described in the CELL CONFIGURATION OPTIONS section.

pathName cellindex cellIndex
Returns the canonical cell index value that corresponds to cellIndex, in the form row,col, where row and col are integers.

pathName cellselection option args
This command is used to adjust the cell selection within a tablelist widget.  It has several forms, depending on option:

pathName cellselection anchor cellIndex
Sets the cell selection anchor to the element given by cellIndex.  If cellIndex refers to a nonexistent or hidden element, then the closest non-hidden element is used.  The cell selection anchor is the end of the cell selection that is fixed while dragging out a cell selection with the mouse if the selection type is cell.  The cell index anchor may be used to refer to the anchor element.

pathName cellselection clear firstCell lastCell
pathName cellselection clear cellIndexList
If any of the elements between firstCell and lastCell (inclusive) or corresponding to the cell indices specified by the list cellIndexList are selected, they are deselected.  The selection state is not changed for elements outside the range given in the first form of the command or different from those specified by the cell index list given in its second form.

pathName cellselection includes cellIndex
Returns 1 if the element indicated by cellIndex is currently selected, 0 if it isn't.

pathName cellselection set firstCell lastCell
pathName cellselection set cellIndexList
Selects all of the selectable non-hidden elements in the range between firstCell and lastCell, inclusive, or corresponding to the indices specified by the list cellIndexList, without affecting the selection state of any other elements.  An element is viewed as selectable if and only if the value of the -selectable option of the row containing it is true.

If the tablelist's state is disabled and option is different from includes then the command just returns an empty string, without performing any of the above actions.

pathName cget option
Returns the current value of the configuration option given by option, which may have any of the values accepted by the tablelist::tablelist command.

pathName columnattrib columnIndex ?name? ?value name value ...?
Queries or modifies the attributes of the column given by columnIndex.  If no name is specified, the command returns a list of pairs, each of which contains the name and the value of an attribute for the column.  If name is specified with no value, then the command returns the value of the one named column attribute, or an empty string if no corresponding value exists (you can use the hascolumnattrib subcommand to distinguish this case from the one that the value of an existing column attribute is an empty string).  If one or more name-value pairs are specified, then the command sets the given column attribute(s) to the given value(s); in this case the return value is an empty string.  name may be an arbitrary string.

pathName columncget columnIndex option
Returns the current value of the column configuration option given by option for the column specified by columnIndex.  option may have any of the values accepted by the columnconfigure command.

pathName columnconfigure columnIndex ?option? ?value option value ...?
Queries or modifies the configuration options of the column given by columnIndex.  If no option is specified, the command returns a list describing all of the available options for the column (see Tk_ConfigureInfo for information on the format of this list).  If option is specified with no value, then the command returns a list describing the one named option (this list will be identical to the corresponding sublist of the value returned if no option is specified).  If one or more option-value pairs are specified, then the command modifies the given column option(s) to have the given value(s); in this case the return value is an empty string.  option may have any of the values described in the COLUMN CONFIGURATION OPTIONS section.

pathName columncount
Returns the number of columns in the tablelist widget.

pathName columnindex columnIndex
Returns the integer column index value that corresponds to columnIndex.

pathName columnwidth columnIndex ?-requested|-stretched|-total?
Returns the current width in pixels of the column specified by columnIndex.  If the optional argument is -requested (which is the default) then the return value is the number of pixels corresponding to the column width specified by the -columns widget or -width column configuration option (possibly overridden by interactive column resizing); if the column width was specified as 0 (and was not changed by interactive column resizing) then the return value is the actual number of pixels corresponding to the widest non-hidden element of the column, including its header.  With the -stretched option, the command returns the column width obtained by increasing the value described above by the number of additional pixels that might have been added to the requested column width by a stretch operation (see the -stretch widget and -stretchable column configuration options).  Finally, if the optional argument is -total then the return value is the stretched column width increased by the number of pixels corresponding to the left and right margins within the column; this value equals the width of the header label if the tablelist widget is mapped.

pathName configcelllist cellConfigSpecList
For each cell index, option, and value specified by the list cellConfigSpecList, the command modifies the given option of the given cell to have the given value.  The argument cellConfigSpecList must be a list of the form 
cellIndex option value cellIndex option value ...

where each option may have any of the values described in the CELL CONFIGURATION OPTIONS section.  The return value is an empty string.

This command has the same effect as

eval [list $pathName configcells] $cellConfigSpecList

but it is more efficient and easier to use.

pathName configcells ?cellIndex option value cellIndex option value ...?
For each cellIndex, option, and value, the command modifies the given option of the given cell to have the given value.  Each option may have any of the values described in the CELL CONFIGURATION OPTIONS section.  The return value is an empty string.

pathName configcolumnlist columnConfigSpecList
For each column index, option, and value specified by the list columnConfigSpecList, the command modifies the given option of the given column to have the given value.  The argument columnConfigSpecList must be a list of the form 
columnIndex option value columnIndex option value ...

where each option may have any of the values described in the COLUMN CONFIGURATION OPTIONS section.  The return value is an empty string.

This command has the same effect as

eval [list $pathName configcolumns] $columnConfigSpecList

but it is more efficient and easier to use.

pathName configcolumns ?columnIndex option value columnIndex option value ...?
For each columnIndex, option, and value, the command modifies the given option of the given column to have the given value.  Each option may have any of the values described in the COLUMN CONFIGURATION OPTIONS section.  The return value is an empty string.

pathName configrowlist rowConfigSpecList
For each row index, option, and value specified by the list rowConfigSpecList, the command modifies the given option of the given row to have the given value.  The argument rowConfigSpecList must be a list of the form 
index option value index option value ...

where each option may have any of the values described in the ROW CONFIGURATION OPTIONS section.  The return value is an empty string.

This command has the same effect as

eval [list $pathName configrows] $rowConfigSpecList

but it is more efficient and easier to use.

pathName configrows ?index option value index option value ...?
For each index, option, and value, the command modifies the given option of the given row to have the given value.  Each option may have any of the values described in the ROW CONFIGURATION OPTIONS section.  The return value is an empty string.

pathName configure ?option? ?value option value ...?
Queries or modifies the configuration options of the widget.  If no option is specified, the command returns a list describing all of the available options for pathName (see Tk_ConfigureInfo for information on the format of this list).  If option is specified with no value, then the command returns a list describing the one named option (this list will be identical to the corresponding sublist of the value returned if no option is specified).  If one or more option-value pairs are specified, then the command modifies the given widget option(s) to have the given value(s); in this case the return value is an empty string.  option may have any of the values accepted by the tablelist::tablelist command.

pathName containing y
Given a y-coordinate within the tablelist window, this command returns the index of the tablelist item containing that y-coordinate.  If no corresponding item is found then the return value is -1.  The coordinate y is expected to be relative to the tablelist window itself (not its body component).

pathName containingcell x y
Given an x- and a y-coordinate within the tablelist window, this command returns the index of the tablelist cell containing the point having these coordinates.  If no corresponding cell is found then the row or column component (or both) of the return value is -1.  The coordinates x and y are expected to be relative to the tablelist window itself (not its body component).

pathName containingcolumn x
Given an x-coordinate within the tablelist window, this command returns the index of the tablelist column containing that x-coordinate.  If no corresponding column is found then the return value is -1.  The coordinate x is expected to be relative to the tablelist window itself (not its body component).

pathName curcellselection
Returns a list containing the canonical indices (of the form row,col, where row and col are numbers) of all of the non-hidden elements in the tablelist that are currently selected.  If there are no such elements in the tablelist then an empty string is returned.

pathName curselection
Returns a list containing the numerical indices of all of the items in the tablelist that contain at least one non-hidden selected element.  If there are no such items in the tablelist then an empty string is returned.

pathName delete first last
pathName delete indexList
Deletes one or more items of the tablelist if its state is not disabled.  In the first form of the command, first and last are indices specifying the first and last items in the range to delete.  The command's second form accepts a list indexList of indices specifying the items to be deleted.  Returns an empty string.

pathName deletecolumns firstColumn lastColumn
pathName deletecolumns columnIndexList
Deletes one or more columns of the tablelist if its state is not disabled.  In the first form of the command, firstColumn and lastColumn are indices specifying the first and last columns in the range to delete.  The command's second form accepts a list columnIndexList of indices specifying the columns to be deleted.  Returns an empty string.

pathName editcell cellIndex
Starts the interactive editing of the cell's contents if the tablelist's state is not disabled, the cell's row and column are not hidden, and the cell is editable.  Returns an empty string.  See the INTERACTIVE CELL EDITING section for details on editablity and on the editing process.

pathName editwintag
Returns the name of a binding tag whose name depends on the path name of the tablelist widget and which is associated with some of the components of the temporary embedded widget used for interactive cell editing.  These components depend on the edit window: the widget itself in case of a Tk or tile checkbutton; the edit window's entry children in case of a mentry widget; the only entry or entry-like component of the edit window in all other cases (see also the entrypath subcommand).  This binding tag precedes the tag TablelistEdit in the list of binding tags of the edit window components mentioned above, and is designed to be used when defining individual binding scripts for controlling the interactive cell editing.  For example, the following command will replace the standard behavior of the Return key during cell editing in the tablelist widget .tbl with that of the Tab key: 
bind [.tbl editwintag] <Return> "[bind TablelistEdit <Tab>]; break"
pathName editwinpath
Returns the path name of the temporary embedded widget used for interactive cell editing, created by the editcell subcommand.  If no cell is currently being edited then the return value is an empty string.  This subcommand enables you to access the edit window from within the commands specified by the -editstartcommand and -editendcommand configuration options.

pathName entrypath
Returns the path name of the entry or entry-like component of the temporary embedded widget used for interactive cell editing, created by the editcell subcommand.  If no cell is currently being edited or the editing is taking place with the aid of a Tk or tile checkbutton or mentry widget then the return value is an empty string; otherwise it is the path name of a Tk or tile entry, Tk text or spinbox, or BWidget Entry widget, which can be the edit window itself or one of its descendants.  This subcommand enables you to access the entry or entry-like component of the temporary embedded widget from within the commands specified by the -editstartcommand and -editendcommand configuration options.

pathName fillcolumn columnIndex text
Sets all the elements of the specified column to the value text.

pathName finishediting
This subcommand attempts to terminate the interactive editing of the contents of the cell whose index was passed to the editcell subcommand by destroying the temporary widget embedded into the cell and updating the cell's contents.  The exact steps involved are as follows:  First, the widget's final text is compared to its original one.  If they are equal then the edit window is destroyed and the cell's original contents are restored.  If the two strings are different and the value of the -editendcommand configuration option is a nonempty string, then the widget's final text is passed to that command as its last argument (following the tablelist's path name as well as the cell's row and column indices), the resulting script is evaluated in the global scope, and the return value becomes the cell's new contents after destroying the edit window.  However, if from within this script the rejectinput subcommand was invoked then the cell's value is not changed and the embedded widget remains displayed in the cell; in this case the command returns the boolean value 0.  In all the other cases, the return value is 1.  Immediately before returning the value 1, the command generates the virtual event <<TablelistCellUpdated>>.  If no cell was being edited when the command was invoked then the same value 1 is returned but no virtual event is generated.

This subcommand is called implicitly by pressing Return or KP_Enter (together with Control if the edit window is a text widget) when editing a cell, or by clicking with the left mouse button anywhere in the tablelist's body, outside the cell just being edited, or moving into another editable cell by using keyboard navigation.

There are also situations where an explicit invocation of this subcommand is needed, in order to make sure that the cell just being edited gets updated with the text entered by the user.  For example, if a tablelist widget is part of a dialog used for editing some data, then the binding script associated with the button designed to accept the data should call this subcommand, because otherwise, if the button is pressed during interactive cell editing then the text entered into the edit window will get lost.

pathName formatinfo
This command is designed to be invoked from within a Tcl command specified as the value of the -formatcommand column configuration option.  It returns a three-element list containing information about the tablelist cell whose content is being formatted with the aid of that command.  The first element of the list is the full key (of the form knumber) associated with the item containing the tablelist element that is being formatted.  The second and third elements of the list are the cell's row and column indices.

This subcommand is needed in cases where the result of the formatting should depend on the cell's row.  To be able to use it, specify the value of the -formatcommand column configuration option as  [list formatCommand pathName],  like in the following example:

.tbl columnconfigure 1 -formatcommand [list formatValue .tbl]

proc formatValue {tbl val} {
    # Get information about the cell whose content is being formatted
    foreach {key row col} [$tbl formatinfo] {}

    # Return a string depending on $val and $row (or $key)
    . . .
}
pathName get first last
pathName get indexList
The first form of the command returns a list whose elements are all of the tablelist items (i.e., row contents) between first and last, inclusive.  The value returned by the second form depends on the number of elements in the list indexList: if the latter contains exactly one index then the return value is the tablelist item indicated by that index (or an empty string if the index refers to a non-existent item); otherwise the command returns the list of all of the tablelist items corresponding to the indices specified by indexList.

pathName getcells firstCell lastCell
pathName getcells cellIndexList
The first form of the command returns a list whose elements are all of the tablelist elements (i.e., cell contents) between firstCell and lastCell, inclusive.  The value returned by the second form depends on the number of elements in the list cellIndexList: if the latter contains exactly one cell index then the return value is the tablelist element indicated by that cell index; otherwise the command returns the list of all of the tablelist elements corresponding to the cell indices specified by cellIndexList.

pathName getcolumns firstColumn lastColumn
pathName getcolumns columnIndexList
The first form of the command returns a list whose elements are lists themselves, where each of the sublists corresponds to exactly one column between firstColumn and lastColumn, inclusive, and consists of all of the tablelist elements contained in that column.  The value returned by the second form depends on the number of elements in the list columnIndexList: if the latter contains exactly one column index then the return value is a list consisting of all of the tablelist elements contained in the column indicated by that column index; otherwise the command returns a list whose elements are lists themselves, where each of the sublists corresponds to exactly one column index in columnIndexList and consists of all of the tablelist elements contained in that column.

pathName getkeys first last
pathName getkeys indexList
The first form of the command returns a list whose elements are all of the sequence numbers associated with the tablelist items between first and last, inclusive.  The value returned by the second form depends on the number of elements in the list indexList: if the latter contains exactly one index then the return value is the sequence number associated with the tablelist item indicated by that index (or an empty string if the index refers to a non-existent item); otherwise the command returns the list of all of the sequence numbers associated with the tablelist items corresponding to the indices specified by indexList.  Each item of a tablelist widget has a unique sequence number that remains unchanged until the item is deleted, thus acting as a key that uniquely identifies the item even if the latter's position (i.e., row index) changes.  This command provides read-only access to these internal item IDs.

pathName hasattrib name
Returns 1 if the attribute name exists and 0 otherwise.

pathName hascellattrib cellIndex name
Returns 1 if the attribute name for the cell given by cellIndex exists and 0 otherwise.

pathName hascolumnattrib columnIndex name
Returns 1 if the attribute name for the column given by columnIndex exists and 0 otherwise.

pathName hasrowattrib index name
Returns 1 if the attribute name for the row given by index exists and 0 otherwise.

pathName imagelabelpath cellIndex
Returns the path name of the label widget containing the image embedded into the cell given by cellIndex, as specified with the -image option of the cellconfigure subcommand.  If no image is currently embedded into the cell then the return value is an empty string.

pathName index index
Returns the integer row index value that corresponds to index.  If index is end then the return value is the number of items in the tablelist (not the index of the last item).

pathName insert index ?item item ...?
Inserts zero or more new items in the widget's internal list just before the item given by index if the tablelist's state is not disabled.  If index equals the number of items or is specified as end then the new items are added to the end of the widget's list.  Tabulator characters are displayed as \t (i.e., a backslash followed by a t) but are inserted unchanged into the internal list.  Newline characters will force line breaks, i.e., will give rise to multi-line elements (which are displayed in embedded message widgets, created on demand).  The return value is an empty string.

pathName insertcolumnlist columnIndex columnList
Inserts the columns specified by the list columnList just before the column given by columnIndex if the tablelist's state is not disabled.  If columnIndex equals the number of columns or is specified as end then the new columns are added to the end of the column list.  The argument columnList must be a list containing the width, title, and optional alignment specifications for the new columns, in the same form as in the case of the -columns configuration option.  The return value is an empty string.  The elements of the new columns are initially empty strings; the easiest way to change these values is to use the fillcolumn subcommand or the -text column configuration option.

This command has the same effect as

eval [list $pathName insertcolumns $columnIndex] $columnList

but it is more efficient and easier to use.

pathName insertcolumns columnIndex ?width title ?alignment? width title ?alignment? ...?
Inserts zero or more new columns just before the column given by columnIndex if the tablelist's state is not disabled.  If columnIndex equals the number of columns or is specified as end then the new columns are added to the end of the column list.  The arguments following the column index have the same meanings as in the case of the -columns configuration option.  The return value is an empty string.  The elements of the new columns are initially empty strings; the easiest way to change these values is to use the fillcolumn subcommand or the -text column configuration option.

pathName insertlist index itemList
Inserts the items of the list itemList in the widget's internal list just before the item given by index if the tablelist's state is not disabled.  If index equals the number of items or is specified as end then the new items are added to the end of the widget's list.  Tabulator characters are displayed as \t (i.e., a backslash followed by a t) but are inserted unchanged into the internal list.  Newline characters will force line breaks, i.e., will give rise to multi-line elements (which are displayed in embedded message widgets, created on demand).  The return value is an empty string.

This command has the same effect as

eval [list $pathName insert $index] $itemList

but it is more efficient and easier to use.

pathName iselemsnipped cellIndex fullTextName
Returns the value 1 if the text displayed in the cell specified by cellIndex is snipped and 0 otherwise.  In both cases, the full (unsnipped) cell text is stored in the variable having the name given by fullTextName; this full text can be the cell's contents or the string obtained from the latter by using the -formatcommand option of the cell's column.  The most common invocation of this command occurs within the procedure specified as the value of the -tooltipaddcommand configuration option.

pathName istitlesnipped columnIndex fullTextName
Returns the value 1 if the text displayed in the header label specified by columnIndex is snipped and 0 otherwise.  In both cases, the full (unsnipped) label text is stored in the variable having the name given by fullTextName.  The most common invocation of this command occurs within the procedure specified as the value of the -tooltipaddcommand configuration option.

pathName itemlistvar
Returns the name of a variable used by Tablelist to hold the widget's internal list.  The recommended way to use this variable is to create a link to it with the aid of the upvar command, like in the following example: 
upvar #0 [.tbl itemlistvar] itemList

In this example, the value of the variable itemList will be the internal list of the tablelist widget .tbl.  Each element of the widget's internal list corresponds to one item, and it is in turn a list whose elements correspond to the elements of that item, except that it has one additional element, holding the item's key.

The itemlistvar command provides an efficient way for accessing this internal list, instead of retrieving the items with the get subcommand or using the -listvariable option (these methods consume significantly more memory).  It can be useful in situations where the elements of a tablelist widget are to be accessed for creating text files, HTML output, XML data, database commands, etc.  This should, however, be a strictly readonly access; otherwise the results will be unpredictable!

pathName labelpath columnIndex
Returns the path name of the header label corresponding to the column indicated by columnIndex.

pathName labels
Returns a list containing the path names of all header labels of the widget.

pathName move source target
Moves the item indicated by source just before the one given by target if the tablelist's state is not disabled.  If target equals the nunber of items or is specified as end then the source item is moved after the last one.  Returns an empty string.

pathName movecolumn sourceColumn targetColumn
Moves the column indicated by sourceColumn just before the one given by targetColumn if the tablelist's state is not disabled.  If targetColumn equals the number of columns or is specified as end then the source column is moved after the last one.  Returns an empty string.

pathName nearest y
Given a y-coordinate within the tablelist window, this command returns the index of the non-hidden tablelist item nearest to that y-coordinate.  The coordinate y is expected to be relative to the tablelist window itself (not its body component).

pathName nearestcell x y
Given an x- and a y-coordinate within the tablelist window, this command returns the index of the non-hidden tablelist cell nearest to the point having these coordinates.  The coordinates x and y are expected to be relative to the tablelist window itself (not its body component).

pathName nearestcolumn x
Given an x-coordinate within the tablelist window, this command returns the index of the non-hidden tablelist column nearest to that x-coordinate.  The coordinate x is expected to be relative to the tablelist window itself (not its body component).

pathName rejectinput
If invoked from within the Tcl command specified by the -editendcommand configuration option, then this subcommand prevents the termination of the interactive editing of the contents of the cell whose index was passed to the editcell subcommand.  It invokes the seecell subcommand to make sure the respective cell becomes visible (in case it was scrolled out of view), and sets the focus to the temporary widget embedded into the cell.  This command enables you to reject the widget's text during the final validation of the string intended to become the new cell contents.

pathName resetsortinfo
Resets the information about the sorting of the items.  Subsequent invocations of sortcolumn and sortorder will return -1 and an empty string, respectively.  Similarly, subsequent invocations of sortcolumnlist and sortorderlist will return an empty string.  This command also removes any existing up- or down-arrows displayed by an earlier invocation of sortbycolumn or sortbycolumnlist.  The return value is an empty string.

pathName rowattrib index ?name? ?value name value ...?
Queries or modifies the attributes of the row given by index.  If no name is specified, the command returns a list of pairs, each of which contains the name and the value of an attribute for the row.  If name is specified with no value, then the command returns the value of the one named row attribute, or an empty string if no corresponding value exists (you can use the hasrowattrib subcommand to distinguish this case from the one that the value of an existing row attribute is an empty string).  If one or more name-value pairs are specified, then the command sets the given row attribute(s) to the given value(s); in this case the return value is an empty string.  name may be an arbitrary string.

pathName rowcget index option
Returns the current value of the row configuration option given by option for the row specified by index.  option may have any of the values accepted by the rowconfigure command.

pathName rowconfigure index ?option? ?value option value ...?
Queries or modifies the configuration options of the row given by index.  If no option is specified, the command returns a list describing all of the available options for the row (see Tk_ConfigureInfo for information on the format of this list).  If option is specified with no value, then the command returns a list describing the one named option (this list will be identical to the corresponding sublist of the value returned if no option is specified).  If one or more option-value pairs are specified, then the command modifies the given row option(s) to have the given value(s); in this case the return value is an empty string.  option may have any of the values described in the ROW CONFIGURATION OPTIONS section.

pathName scan option args
This command is used to implement scanning on tablelist widgets.  It has two forms, depending on option:

pathName scan mark x y
Records x and y and the current view in the tablelist window; used in conjunction with later  scan dragto  commands.  Typically this command is associated with a mouse button press in the body component of the widget.  It returns an empty string.  The coordinates x and y are expected to be relative to the tablelist window itself (not its body component).

pathName scan dragto x y
This command computes the difference between its x and y arguments to the last  scan mark  command for the widget.  It then adjusts the view (the vertical one only in the body component) by 10 times the difference in coordinates.  This command is typically associated with mouse motion events in the body component of the widget, to produce the effect of dragging the table at high speed through the window.  The return value is an empty string.  The coordinates x and y are expected to be relative to the tablelist window itself (not its body component).

pathName see index
Adjusts the view in the tablelist so that the item given by index is visible.  If the item is already visible then the command has no effect; if the item is near one edge of the window then the tablelist scrolls to bring the item into view at the edge; otherwise the tablelist scrolls to center the item.

pathName seecell cellIndex
Adjusts the view in the tablelist so that the cell given by cellIndex is visible.  If the cell is already visible then the command has no effect; if the cell is near one edge of the window then the tablelist scrolls to bring the cell into view at the edge; otherwise the tablelist scrolls to center the cell.  If the value of the -titlecolumns option is positive then the centering of the cell is only done vertically; the horizontal scrolling (which in this case is performed column-wise) will just bring the cell into view next to the title columns or at the right edge of the window.

pathName seecolumn columnIndex
Adjusts the view in the tablelist so that the column given by columnIndex is visible.  If the column is already visible then the command has no effect; if the column is near one edge of the window then the tablelist scrolls horizontally to bring the column into view at the edge; otherwise the tablelist scrolls horizontally to center the column.  If the value of the -titlecolumns option is positive then the horizontal scrolling (which in this case is performed column-wise) will just bring the column into view next to the title columns or at the right edge of the window.

pathName selection option args
This command is used to adjust the selection within a tablelist widget.  It has several forms, depending on option:

pathName selection anchor index
Sets the selection anchor to the item given by index.  If index refers to a nonexistent or hidden item, then the closest non-hidden item is used.  The selection anchor is the end of the selection that is fixed while dragging out a selection with the mouse if the selection type is row.  The index anchor may be used to refer to the anchor item.

pathName selection clear first last
pathName selection clear indexList
If any of the items between first and last (inclusive) or corresponding to the indices specified by the list indexList contain at least one selected cell, they are deselected.  The selection state is not changed for items outside the range given in the first form of the command or different from those specified by the index list given in its second form.

pathName selection includes index
Returns 1 if the item indicated by index contains at least one non-hidden selected cell, 0 if it doesn't.

pathName selection set first last
pathName selection set indexList
Selects all of the selectable items in the range between first and last, inclusive, or corresponding to the indices specified by the list indexList, without affecting the selection state of any other items.

If the tablelist's state is disabled and option is different from includes then the command just returns an empty string, without performing any of the above actions.

pathName separatorpath ?columnIndex?
If the optional argument is not specified, then this command returns the path name of the special separator displayed to mark the end of the title columns if the value of the -titlecolumns option is positive and an empty string otherwise.  If the optional argument is present, then the command returns the path name of the separator attached to the right edge of the header label indicated by columnIndex if the value of the -showseparators configuration option is true and an empty string otherwise.

pathName separators
Returns a list containing the path names of all column separators.  If the value of the -titlecolumns option is positive then the first element of the list will be the path name of the special separator displayed to mark the end of the title columns.  Whether the path names of the other separators are included in the list, depends on the value of the -showseparators configuration option.

pathName size
Returns the total number of items in the tablelist widget.

pathName sort ?-increasing|-decreasing?
Sorts the items in increasing or decreasing order, as specified by the optional argument.  The default is -increasing.  Uses the value of the -sortcommand widget configuration option as comparison command.  sort also removes any existing up- or down-arrows displayed by an earlier invocation of sortbycolumn or sortbycolumnlist.  After sorting the items, the command conditionally adjusts the vertical view as follows: (a) if interactive cell editing is in progress then the cell being edited is brought into view; (b) else, if exactly one item is selected then the view is shifted to bring that item into view; (c) else, if the tablelist's body is the most recent window to have the input focus among all the windows in the same top-level as the widget itself then the currently active item is brought into view.

pathName sortbycolumn columnIndex ?-increasing|-decreasing?
Sorts the items based on the elements of the column given by columnIndex, in increasing or decreasing order, as specified by the optional argument.  The default is -increasing.  The sorting process is controlled by the values of the -sortmode and -sortcommand options for the given column.  If both the value of the -showarrow configuration option and that of the -showarrow option for the specified column are true then an up- or down-arrow indicating the sort order will be placed into the column's label.  The shape of the arrow depends on the command's optional argument and on the value of the -incrarrowtype configuration option.  If the label's text is right-aligned then the arrow will be displayed on the left side of the label, otherwise on its right side.  After sorting the items, the vertical view is adjusted in the same way as in the case of the sort subcommand.

The actions described above are only performed if the specified column's -showlinenumbers option hasn't been set to true.

pathName sortbycolumnlist columnIndexList ?sortOrderList?
Sorts the items based on the elements of the columns given by the columnIndexList argument, which must be a list of distinct column indices.  Only those elements of this list are considered significant that identify columns whose -showlinenumbers option hasn't been set to true.

The items are first sorted based on the column specified by the last significant element of columnIndexList, then based on the one given by the last but one significant element, and so on.  The order of each sort operation is taken from the optional argument sortOrderList, whose elements must be (abbreviations of) increasing or decreasing.  If this argument was not specified or contains less elements than columnIndexList then the missing sort orders are assumed to be increasing.  Each sorting process is controlled by the values of the -sortmode and -sortcommand options for the respective column.  If the column's index was specified among the first 9 significant elements of columnIndexList and both the value of the -showarrow configuration option and that of the -showarrow option for that column are true then an up- or down-arrow indicating the sort order will be placed into the column's label.  The shape of the arrow depends on the respective sort order and on the value of the -incrarrowtype configuration option.  If the label's text is right-aligned then the arrow will be displayed on the left side of the label, otherwise on its right side.  If more than one sort arrows are to be displayed then the first 9 sort ranks (1 for the first significant element of columnIndexList, 2 for the second one, and so on) will also be shown to the right of the arrows.  After sorting the items, the vertical view is adjusted in the same way as in the case of the sort subcommand.

pathName sortcolumn
Returns the numerical index of the column by which the items were last sorted with the aid of the sortbycolumn or sortbycolumnlist command, or -1 if they were last sorted with the sort command or haven't been sorted at all, or the sort information was reset by invoking resetsortinfo.

pathName sortcolumnlist
Returns a list consisting of the numerical indices of the columns by which the items were last sorted with the aid of the sortbycolumnlist or sortbycolumn command (in the second case the list will contain exactly one element), or an empty string if they were last sorted with the sort command or haven't been sorted at all, or the sort information was reset by invoking resetsortinfo.

pathName sortorder
Returns the sort order (as increasing or decreasing) from the last sorting performed by the sort, sortbycolumn, or sortbycolumnlist command, or an empty string if the items haven't been sorted at all, or the sort information was reset by invoking resetsortinfo.

pathName sortorderlist
Returns a list consisting of the sort orders (as increasing or decreasing) from the last invocation of the sortbycolumnlist or sortbycolumn command (in the second case the list will contain exactly one element), or an empty string if the items were last sorted with the sort command or haven't been sorted at all, or the sort information was reset by invoking resetsortinfo.

pathName togglecolumnhide firstColumn lastColumn
pathName togglecolumnhide columnIndexList
Toggles the value of the -hide option for one or more columns of the tablelist widget.  In the first form of the command, firstColumn and lastColumn are indices specifying the first and last columns in the range whose visibility is to be toggled.  The command's second form accepts a list columnIndexList of indices specifying the columns whose visibility is to be toggled.  Returns an empty string.  After toggling the hidden state of the specified columns, the <<TablelistColHiddenStateChanged>> virtual event is generated.  The main advantage of using this command instead of invoking columnconfigure for each of the specified columns is that it causes only one redisplay of the widget's contents, thus being significantly faster.

pathName togglerowhide first last
pathName togglerowhide indexList
Toggles the value of the -hide option for one or more rows of the tablelist widget.  In the first form of the command, first and last are indices specifying the first and last rows in the range whose visibility is to be toggled.  The command's second form accepts a list indexList of indices specifying the rows whose visibility is to be toggled.  Returns an empty string.  After toggling the hidden state of the specified rows, the <<TablelistRowHiddenStateChanged>> virtual event is generated.  Just like the -hide row configuration option, this subcommand is not supported for Tk versions earlier than 8.3.

CAUTION:  Tk versions 8.3 - 8.4.12 had a bug that caused a segmentation fault if the whole content of a text widget was elided.  This bug was also present in Tk 8.5.a1 - 8.5.a3.  When using one of these earlier Tk versions, this bug will produce a crash if all the rows of a tablelist widget are hidden.  It is your responsibility to avoid such situations when using a Tk version having this bug!

pathName unsetattrib name
Unsets the attribute name.  Returns an empty string.

pathName unsetcellattrib cellIndex name
Unsets the attribute name for the cell given by cellIndex.  Returns an empty string.

pathName unsetcolumnattrib columnIndex name
Unsets the attribute name for the column given by columnIndex.  Returns an empty string.

pathName unsetrowattrib index name
Unsets the attribute name for the row given by index.  Returns an empty string.

pathName windowpath cellIndex
Returns the path name of the window contained in the cell given by cellIndex, created with the -window option of the cellconfigure subcommand.  If no window is currently embedded into the cell then the return value is an empty string.

pathName xview args
This command is used to query and change the horizontal position of the information in the widget's window.  It can take any of the following forms:

pathName xview
Returns a list containing two elements.  Each element is a real fraction between 0 and 1; together they describe the horizontal span that is visible in the window.  For example, if the first element is .2 and the second element is .6, 20% of the tablelist's scrollable text is off-screen to the left, the middle 40% is visible in the window, and 40% of the scrollable text is off-screen to the right.  These are the same values passed to scrollbars via the -xscrollcommand option.

pathName xview units
If the value of the -titlecolumns option is positive then this command adjusts the view in the window so that the column whose offset from the end of the title column area equals units non-hidden columns is displayed next to the title columns.  Otherwise the command adjusts the view in the window so that the character position given by units is displayed at the left edge of the window.  Character positions are defined by the width of the character 0.

pathName xview moveto fraction
Adjusts the view in the window so that fraction of the total width of the scrollable tablelist text is off-screen to the left.  fraction must be a fraction between 0 and 1.

pathName xview scroll number what
This command shifts the view in the window left or right according to number and what.  number must be an integer.  what must be either units or pages or an abbreviation of one of these.  If what is units, the view adjusts left or right by number non-hidden columns or character units (the width of the 0 character) on the display, depending on the value of the -titlecolumns option; if what is pages then the view adjusts by number screenfuls.  If number is negative then columns or characters farther to the left become visible; if it is positive then columns or characters farther to the right become visible.

pathName yview args
This command is used to query and change the vertical position of the text in the window of the widget's body component.  It can take any of the following forms:

pathName yview
Returns a list containing two elements, both of which are real fractions between 0 and 1.  The first element gives the position of the non-hidden tablelist item at the top of the window, relative to the tablelist as a whole (0.5 means it is halfway through the tablelist, for example).  The second element gives the position of the non-hidden tablelist item just after the last one in the window, relative to the tablelist as a whole.  These are the same values passed to scrollbars via the -yscrollcommand option.

pathName yview units
Adjusts the view in the window so that the item whose offset equals units non-hidden rows is displayed at the top of the window.

pathName yview moveto fraction
Adjusts the view in the window so that the non-hidden item given by fraction appears at the top of the window.  fraction is a fraction between 0 and 1; 0 indicates the first non-hidden item in the tablelist, 0.33 indicates the non-hidden item one-third the way through the tablelist, and so on.

pathName yview scroll number what
This command shifts the view in the window up or down according to number and what.  number must be an integer.  what must be either units or pages or an abbreviation of one of these.  If what is units, the view adjusts up or down by number non-hidden rows; if it is pages then the view adjusts by number screenfuls.  If number is negative then earlier items become visible; if it is positive then later items become visible.

DEFAULT AND INDIVIDUAL BINDINGS FOR THE TABLELIST BODY
The body component of a tablelist is implemented as a text widget whose binding tag Text is replaced with a new binding tag called TablelistBody.  The latter has all the events of the Listbox widget class, and several of its binding scripts are obtained from those of Listbox by replacing the event fields %W, %x, and %y with the path name of the tablelist widget and the x and y coordinates relative to the latter.  These values are assigned to the help variables tablelist::W, tablelist::x, and tablelist::y by invoking the helper command tablelist::convEventFields as follows: 
foreach {tablelist::W tablelist::x tablelist::y} \
    [tablelist::convEventFields %W %x %y] {}

This conversion of the event fields is necessary because the Tcl command associated with a tablelist expects any coordinates relative to the widget itself, not its body component.  It makes use of help variables from the tablelist namespace in order to avoid any conflicts with global variables.

Several of the events have no %x and %y fields; in this case another helper command tablelist::getTablelistPath is used to set the help variable tablelist::W to the path name of the tablelist widget:

set tablelist::W [tablelist::getTablelistPath %W]

The binding tag TablelistBody replaces the class name (Frame or TSeparator) of the separator widgets, too.  It also replaces the binding tag Message of the message widgets used to display multi-line elements, as well as the binding tag Label of the label widgets used to display embedded images.  This makes sure that the default handling of the mouse events on the column separators, multi-line cells, and embedded images is the same as in the rest of the tablelist's body.

When defining individual bindings for tablelist widgets, the same conversion of the event fields is needed as for the default bindings.  For example, the binding script below for the tablelist widget .tbl prints the index of the cell where mouse button 1 was clicked:

bind [.tbl bodytag] <Button-1> {
    foreach {tablelist::W tablelist::x tablelist::y} \
        [tablelist::convEventFields %W %x %y] {}
    puts "clicked on cell [.tbl containingcell $tablelist::x $tablelist::y]"
}

By associating the script with the binding tag returned by the bodytag subcommand instead of just with the path name of the tablelist's body we make sure to have the same event handling for the separators, multi-line cells, and embedded images as for the rest of the tablelist's body.

The bindings associated with the binding tag TablelistBody, created automatically by the tablelist::tablelist command, ensure that the body component of a tablelist has the same default behavior as a listbox widget.  If the selection type is row (which is the default) then everything described in the "DEFAULT BINDINGS" section of the listbox manual entry applies to the body component of a tablelist, too.  The only difference is that the word "element" in that manual page has to be replaced with "item" when applying the description to the body of a tablelist widget.

If the selection type is cell then everything described in the "DEFAULT BINDINGS" section of the listbox manual entry applies to the body component of a tablelist, too, with the following extensions and changes:

  1. If Tab or Shift-Tab is pressed, the location cursor (active element) moves to the next/previous element.  If the selection mode is browse or extended then the new active element is also selected and all other elements are deselected.  In extended mode the new active element becomes the selection anchor.  Notice that these bindings replace the common inter-widget navigation via Tab and Shift-Tab with inter-cell navigation.  Just like in the case of the text widget, Control-Tab and Control-Shift-Tab are intended to be used for widget-to-widget keyboard navigation.  Unfortunately, this won't always work because some window managers intercept the latter key sequences and use them for their own purposes (like inter-workplace navigation).  For this reason, Tablelist supports the additional key sequences Meta-Tab and Meta-Shift-Tab as replacements for Control-Tab and Control-Shift-Tab, respectively.
     
  2. If the Left or Right key is pressed, the location cursor (active element) moves to the previous/next element of the active row.  If the selection mode is browse or extended then the new active element is also selected and all other elements are deselected.  In extended mode the new active element becomes the selection anchor.
     
  3. In extended mode, Shift-Left and Shift-Right move the location cursor (active element) to the previous/next element of the active row and also extend the selection to that element in a fashion similar to dragging with mouse button 1.
     
  4. If the Home or End key is pressed, the location cursor (active element) moves to the first/last element of the active row, the new active element is selected, and all other elements are deselected.
     
  5. In extended mode, Shift-Home and Shift-End extend the selection to the first/last element of the active row.  In multiple mode, Shift-Home and Shift-End move the location cursor to the first/last element of the active row.
     
  6. If the location cursor is in an editable cell then Return and KP_Enter start the interactive editing of the active element.

Just like in the case of the listbox widget, any changes to the selection will automatically generate the virtual event <<ListboxSelect>>.  Instead of this event (which is supported for compatibility reasons), the virtual event <<TablelistSelect>> can be used to be made aware of any changes to tablelist selection.  Both events will be generated independently of the selection type.

The following binding associated with the binding tag TablelistBody is only valid if the selection mode is single or multiple:  If mouse button 1 is clicked on an item and then dragged outside that item, and the value of the -movablerows configuration option is true, then the mouse cursor takes on the shape specified by the -movecursor option, indicating that the item in question is being moved to another position, visualized with the aid of a gap placed before the target item.  This operation ends when mouse button 1 is released, and can be canceled by pressing the Escape key.  In both cases, the mouse cursor is reset to its original value, specified by the -cursor configuration option.  After releasing mouse button 1, the source item is moved before the one indicated by the gap mentioned above and the virtual event <<TablelistRowMoved>> is generated.

DEFAULT BINDINGS FOR THE HEADER LABELS
The tablelist::tablelist command automatically creates the following bindings for the header labels:
 
  1. If the mouse pointer is on the right edge of a header label or within a few pixels of its right edge, and both the value of the -resizablecolumns configuration option and that of the -resizable option for the column corresponding to that label are true, then the mouse cursor takes on the shape specified by the -resizecursor option.  By clicking mouse button 1 in this area and moving the mouse while its button 1 is down, the column corresponding to that label will be resized by the amount of the cursor motion.  The interactive column resizing ends when mouse button 1 is released, and can be canceled by pressing the Escape key.  In both cases, the mouse cursor is reset to its original value, specified by the -cursor configuration option.  When the column resize operation is finished, the virtual event <<TablelistColumnResized>> is generated.
     
  2. If mouse button 1 is pressed over a header label but outside the resize area described above and then dragged outside the label, and the value of the -movablecolumns configuration option is true, then the mouse cursor takes on the shape specified by the -movecolumncursor option, indicating that the column in question is being moved to another position, visualized with the aid of a gap placed before the label of the target column.  This operation ends when mouse button 1 is released, and can be canceled by pressing the Escape key when the mouse pointer is outside the label.  In both cases, the mouse cursor is reset to its original value, specified by the -cursor configuration option.  After releasing mouse button 1, the source column is moved before the one indicated by the gap mentioned above and the virtual event <<TablelistColumnMoved>> is generated.
     
  3. If mouse button 1 is pressed over a header label but outside the resize area described above and later released over the same label, and the command specified by the -labelcommand option is a nonempty string, then this command is concatenated with the name of the tablelist widget and the column index of the respective label, and the resulting script is evaluated in the global scope.  If another nonempty label command was specified at column level by using the columnconfigure option of the Tcl command associated with the tablelist widget, then that column-specific command will be used instead of the global one.  If mouse button 1 was pressed together with the Shift key then the widget- or column-specific command mentioned above will be replaced with the one specified by the -labelcommand2 option at widget or column level.
     
  4. The Tablelist package defines the virtual event <<Button3>> as <Button-3> for all windowing systems and additionally as <Control-Button-1> for Mac OS Classic and Mac OS X Aqua.  If this event occurs over a header label and both the value of the -resizablecolumns configuration option and that of the -resizable option for the column corresponding to that label are true, then the width of that column is set to zero, i.e., it is made just large enough to hold all the elements in the column, including the header (but no larger than the maximum width indicated by the -maxwidth column configuration option), and the virtual event <<TablelistColumnResized>> is generated.  The same action is triggered by double-clicking the resize area of a header label.
     
  5. The Tablelist package defines the virtual event <<ShiftButton3>> as <Shift-Button-3> for all windowing systems and additionally as <Shift-Control-Button-1> for Mac OS Classic and Mac OS X Aqua.  If this event occurs over a header label and both the value of the -resizablecolumns configuration option and that of the -resizable option for the column corresponding to that label are true, then the width of that column is set to its last static width (if any) and the virtual event <<TablelistColumnResized>> is generated.  The same action is triggered by double-clicking the resize area of a header label with the Shift key held down.

If the tablelist's state is disabled then none of the above actions occur: the labels are completely insensitive.

DEFAULT BINDINGS FOR INTERACTIVE CELL EDITING
The tablelist::tablelist command extends and partially redefines the bindings of some of the components of the temporary embedded widget used for interactive cell editing, which is started by clicking mouse button 1 in an editable cell or using keyboard navigation to move from one editable cell into another.  If the selection type is cell and the location cursor is in an editable cell, then the interactive editing of the active element can also be started by pressing Return or KP_Enter.

The affected components of the temporary embedded widget depend on the edit window: the widget itself in case of a Tk or tile checkbutton; the edit window's entry children in case of a mentry widget; the only entry or entry-like component of the edit window in all other cases (see also the entrypath subcommand).  The list of binding tags of these edit window components contains two addditional tags, inserted just before their path names: the binding tag whose name is returned by the editwintag subcommand, followed by the tag TablelistEdit.  The bindings described below are associated with the tag TablelistEdit, and can be overridden for individual tablelist widgets by making use of the binding tag given by the editwintag subcommand.

  1. Control-i inserts a tabulator character into the edit window's entry or entry-like components (if any), at the point of the insertion cursor.
     
  2. Control-j inserts a newline character into the edit window's entry or entry-like components (if any), at the point of the insertion cursor.
     
  3. If the edit window is a text widget then Return and KP_Enter insert a newline character at the point of the insertion cursor.  Otherwise they terminate the editing and destroy the edit window.
     
  4. Control-Return and Control-KP_Enter terminate the editing and destroy the edit window.
     
  5. Escape aborts the editing and destroys the edit window.
     
  6. A click with the left mouse button anywhere in the tablelist's body, outside the cell just being edited, terminates the editing in the current cell and destroys the edit window or moves it into the cell that was just clicked into if the latter is editable.
     
  7. When editing a cell that is not the only editable cell of the tablelist widget, Tab and Shift-Tab terminate the editing in the current cell, move the edit window into the next/previous editable cell of the tablelist, select the contents of the edit window's first entry or entry-like component (if any), and set the insertion cursor to its end.  If the new edit window is a text widget then its contents are left unselected.  Notice that these bindings replace the common inter-widget navigation via Tab and Shift-Tab with inter-cell navigation.  Just like in the case of the text widget, Control-Tab and Control-Shift-Tab are intended to be used for widget-to-widget keyboard navigation during interactive cell editing.  Unfortunately, this won't always work because some window managers intercept the latter key sequences and use them for their own purposes (like inter-workplace navigation).  For this reason, Tablelist supports the additional key sequences Meta-Tab and Meta-Shift-Tab as replacements for Control-Tab and Control-Shift-Tab, respectively.
     
  8. When editing a cell that is not the first/last editable cell within its row, Alt-Left/Alt-Right (Command-Left/Command-Right on Mac OS Classic and Mac OS X Aqua) terminates the editing in the current cell, moves the edit window into the previous/next editable cell of the row, selects the contents of the edit window's first entry or entry-like component (if any), and sets the insertion cursor to its end.  If the new edit window is a text widget then its contents are left unselected.  The key sequence Meta-Left/Meta-Right has the same effect as Alt-Left/Alt-Right.  If tk_strictMotif is false and the edit window is not a text widget then Meta-b and Meta-f behave the same as Alt-Left and Alt-Right, respectively.  If the edit window is a Tk or tile checkbutton widget then Left/Right has the same effect as Alt-Left/Alt-Right.
     
  9. When editing a cell that is not the first/last editable cell within its column, Alt-Up/Alt-Down (Command-Up/Command-Down on Mac OS Classic and Mac OS X Aqua) terminates the editing in the current cell, moves the edit window one line up/down within the column, selects the contents of the edit window's first entry or entry-like component (if any), and sets the insertion cursor to its end.  If the new edit window is a text widget then its contents are left unselected.  The key sequence Meta-Up/Meta-Down has the same effect as Alt-Up/Alt-Down.  If tk_strictMotif is false and the edit window is not a text widget or an Iwidgets combobox, then Control-p and Control-n behave the same as Alt-Up and Alt-Down, respectively.  If the edit window is a Tk or tile entry, Tk or tile checkbutton, BWidget Entry, Iwidgets entryfield/spinner/spinint, or a mentry widget of type "FixedPoint", then Up/Down has the same effect as Alt-Up/Alt-Down.
     
  10. When editing a cell that is not the first/last editable cell within its column, Alt-Prior/Alt-Next (Command-Prior/Command-Next on Mac OS Classic and Mac OS X Aqua) terminates the editing in the current cell, moves the edit window up/down by one page within the column, selects the contents of the edit window's first entry or entry-like component (if any), and sets the insertion cursor to its end.  If the new edit window is a text widget then its contents are left unselected.  The key sequence Meta-Prior/Meta-Next has the same effect as Alt-Prior/Alt-Next.  If the edit window is not a text widget, BWidget SpinBox, Oakley combobox, or a mentry widget of type "Date", "Time", "DateTime", or "IPAddr", then Prior/Next has the same effect as Alt-Prior/Alt-Next.
     
  11. When editing a cell that is not the only editable cell of the tablelist widget, Alt-Home/Alt-End (Command-Home/Command-End on Mac OS Classic and Mac OS X Aqua) terminates the editing in the current cell, moves the edit window into the first/last editable cell of the tablelist, selects the contents of the edit window's first entry or entry-like component (if any), and sets the insertion cursor to its end.  If the new edit window is a text widget then its contents are left unselected.  The key sequence Meta-Home/Meta-End has the same effect as Alt-Home/Alt-End.  If tk_strictMotif is false and the edit window is not a text widget then Meta-< and Meta-> behave the same as Alt-Home and Alt-End, respectively.  If the edit window is not a text widget then Control-Home/Control-End has the same effect as Alt-Home/Alt-End.

Before moving the edit window, the key sequences mentioned under 7 - 11 move the active item or element and change the (cell)selection and the (cell)selection anchor in the body of the tablelist widget.  For example, if Alt-Up/Alt-Down or Meta-Up/Meta-Down (Command-Up/Command-Down on Mac OS Classic and Mac OS X Aqua) is pressed when editing a cell that is not the first/last editable cell within its column, then the active item or element (depending on the selection type) moves one line up/down.  If the selection mode is browse or extended then the new active item or element is also selected and all other items or elements are deselected.  In extended mode the new active item or element becomes the (cell)selection anchor.  This is exactly the same behavior as the one exhibited by the Up and Down keys in the tablelist's body.

If the tablelist's state is disabled then none of the above actions occur.

KEYWORDS
tablelist, multi-column, listbox, widget

Contents     Start page